Three-quarter exterior view of a complete U-shaped cleanroom air shower

Peralatan Dekontaminasi Personil dan Bahan

Mandi Udara Cleanroom Berbentuk U

A folded 180-degree air shower route that returns the clean-side exit to the same side as the entrance while extending the cleaning path.

180-Degree Return Route
Same-Side Openings
Extended Air Exposure
Zoned Corner Returns

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The U-shaped air shower uses two internal turns to connect both controlled openings to the same face of the enclosure. Directional nozzle zones follow the folded route, while returns at the bends collect dust close to where it is dislodged. This configuration supports facility retrofits where neither a straight nor an L-shaped transfer path can connect the gowning and clean areas.

Fitur utama:

The folded passage puts entry and exit on one external face.

Successive cleaning zones lengthen exposure without requiring a stationary batch cycle.

Ceiling nozzles can cover garments as operators change orientation at the turns.

Returns at both bends reduce particle accumulation in internal corners.

Zoned fan sections support more even pressure across the two legs.

Kekhawatiran produk pelanggan

A folded route must avoid stagnant corners and prevent the remote cleaning leg from becoming a low-pressure zone.

The two connected rooms are located on the same wall with no straight route.A U-shaped enclosure returns traffic after two controlled turns.

Lint builds up in inner corners when returns are only at the entrance.Dedicated return grilles at both bends collect contamination locally.

Remote nozzle rows lose pressure through a long common plenum.Zoned blower-filter sections supply each leg through shorter duct paths.

Users may be uncertain of the direction through a folded chamber.Sequential indicators can identify entry, cleaning route and clean-side exit.

Aplikasi yang Tipis

Same-wall gowning connectionsSpace-constrained retrofitsPharmaceutical corridor reconfigurationControlled laboratory entrances

Parameter teknis

Representative construction ranges for a U-shaped personnel air shower are listed below.

Bahan inti	Multi-zone insulated steel enclosure with H13 HEPA fan sections, stainless nozzles and corner return-air plenums
Ketebalan Panel (Panel Thickness)	50-75 mm modular wall and divider panels
Efektif lebar	900-1500 mm clear width along each U-shaped passage leg
Panjang maksimum	Up to 4500 mm overall folded enclosure length
Baja menghadap ketebalan	1.2-1.5 mm steel facing at dividers, returns and door frames
Kepadatan inti (core density)	60-90 kg/m³ composite mineral insulation
Konduktivitas Termal (Thermal Conductivity)	0.032-0.042 W/(m·K) for the insulated partition construction
Permukaan selesai	Light-colour cleanroom powder coating with abrasion-resistant corner guards
Jenis Bersama	Bolted U-module junctions with sealed divider edges and sequence-controlled door interlocks
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Clockwise or counter-clockwise routeTwo or three cleaning zonesTraffic-direction lightsEmergency release at outer doors

Planning a U-Shaped Cleanroom Air Shower specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami