Three-quarter exterior view of a complete U-shaped cleanroom air shower

Peralatan Dekontaminasi Kakitangan dan Bahan

U-Bentuk bilik mandi udara bersih

A folded 180-degree air shower route that returns the clean-side exit to the same side as the entrance while extending the cleaning path.

180-Degree Return Route
Same-Side Openings
Extended Air Exposure
Zoned Corner Returns

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The U-shaped air shower uses two internal turns to connect both controlled openings to the same face of the enclosure. Directional nozzle zones follow the folded route, while returns at the bends collect dust close to where it is dislodged. This configuration supports facility retrofits where neither a straight nor an L-shaped transfer path can connect the gowning and clean areas.

Ciri-ciri Utama

The folded passage puts entry and exit on one external face.

Successive cleaning zones lengthen exposure without requiring a stationary batch cycle.

Ceiling nozzles can cover garments as operators change orientation at the turns.

Returns at both bends reduce particle accumulation in internal corners.

Zoned fan sections support more even pressure across the two legs.

Kebimbangan Produk Pelanggan

A folded route must avoid stagnant corners and prevent the remote cleaning leg from becoming a low-pressure zone.

The two connected rooms are located on the same wall with no straight route.A U-shaped enclosure returns traffic after two controlled turns.

Lint builds up in inner corners when returns are only at the entrance.Dedicated return grilles at both bends collect contamination locally.

Remote nozzle rows lose pressure through a long common plenum.Zoned blower-filter sections supply each leg through shorter duct paths.

Users may be uncertain of the direction through a folded chamber.Sequential indicators can identify entry, cleaning route and clean-side exit.

Permohonan yang biasa

Same-wall gowning connectionsSpace-constrained retrofitsPharmaceutical corridor reconfigurationControlled laboratory entrances

Parameter teknikal

Representative construction ranges for a U-shaped personnel air shower are listed below.

Bahan Teras	Multi-zone insulated steel enclosure with H13 HEPA fan sections, stainless nozzles and corner return-air plenums
Ketebalan Panel	50-75 mm modular wall and divider panels
Lebar berkesan	900-1500 mm clear width along each U-shaped passage leg
Panjang maksimum	Up to 4500 mm overall folded enclosure length
Keluli Menghadapi Ketebalan	1.2-1.5 mm steel facing at dividers, returns and door frames
Ketumpatan teras	60-90 kg/m³ composite mineral insulation
Kekonduksian Terma	0.032-0.042 W/(m·K) for the insulated partition construction
Kemasan permukaan	Light-colour cleanroom powder coating with abrasion-resistant corner guards
Jenis Bersatu	Bolted U-module junctions with sealed divider edges and sequence-controlled door interlocks
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Clockwise or counter-clockwise routeTwo or three cleaning zonesTraffic-direction lightsEmergency release at outer doors

Planning a U-Shaped Cleanroom Air Shower specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami