İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Personel ve Malzeme Dekontaminasyon Ekipmanları
U-Shaped Temiz Oda Hava Duş
A folded 180-degree air shower route that returns the clean-side exit to the same side as the entrance while extending the cleaning path.
- 180-Degree Return Route
- Same-Side Openings
- Extended Air Exposure
- Zoned Corner Returns
Ürün tanıtımı
The U-shaped air shower uses two internal turns to connect both controlled openings to the same face of the enclosure. Directional nozzle zones follow the folded route, while returns at the bends collect dust close to where it is dislodged. This configuration supports facility retrofits where neither a straight nor an L-shaped transfer path can connect the gowning and clean areas.
Ana Özellikler
Successive cleaning zones lengthen exposure without requiring a stationary batch cycle.
Ceiling nozzles can cover garments as operators change orientation at the turns.
Returns at both bends reduce particle accumulation in internal corners.
Zoned fan sections support more even pressure across the two legs.
Müşteri Ürün Sorunları
A folded route must avoid stagnant corners and prevent the remote cleaning leg from becoming a low-pressure zone.
The two connected rooms are located on the same wall with no straight route.A U-shaped enclosure returns traffic after two controlled turns.
Lint builds up in inner corners when returns are only at the entrance.Dedicated return grilles at both bends collect contamination locally.
Remote nozzle rows lose pressure through a long common plenum.Zoned blower-filter sections supply each leg through shorter duct paths.
Users may be uncertain of the direction through a folded chamber.Sequential indicators can identify entry, cleaning route and clean-side exit.
Tipik uygulamalar
Same-wall gowning connectionsSpace-constrained retrofitsPharmaceutical corridor reconfigurationControlled laboratory entrances
Teknik parametreler
Representative construction ranges for a U-shaped personnel air shower are listed below.
| Temel malzemeler | Multi-zone insulated steel enclosure with H13 HEPA fan sections, stainless nozzles and corner return-air plenums |
|---|---|
| Panel kalınlığı | 50-75 mm modular wall and divider panels |
| Effective Width (Etkili Genişlik) | 900-1500 mm clear width along each U-shaped passage leg |
| Maksimum uzunluk | Up to 4500 mm overall folded enclosure length |
| Çelik yüz yüze kalınlığı | 1.2-1.5 mm steel facing at dividers, returns and door frames |
| Core Density (Çekirdek Yoğunluğu) | 60-90 kg/m³ composite mineral insulation |
| Termal İletkenlik | 0.032-0.042 W/(m·K) for the insulated partition construction |
| Yüzey bitirme | Light-colour cleanroom powder coating with abrasion-resistant corner guards |
| Ortak tip | Bolted U-module junctions with sealed divider edges and sequence-controlled door interlocks |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Clockwise or counter-clockwise routeTwo or three cleaning zonesTraffic-direction lightsEmergency release at outer doors
Planning a U-Shaped Cleanroom Air Shower specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
