Three-quarter exterior view of a complete U-shaped cleanroom air shower

Персонал и оборудование для дезактивации материалов

У-образный воздушный душ в чистой комнате

A folded 180-degree air shower route that returns the clean-side exit to the same side as the entrance while extending the cleaning path.

180-Degree Return Route
Same-Side Openings
Extended Air Exposure
Zoned Corner Returns

Запрос котировки Просмотреть продукты

Введение продукции

The U-shaped air shower uses two internal turns to connect both controlled openings to the same face of the enclosure. Directional nozzle zones follow the folded route, while returns at the bends collect dust close to where it is dislodged. This configuration supports facility retrofits where neither a straight nor an L-shaped transfer path can connect the gowning and clean areas.

Основные характеристики

The folded passage puts entry and exit on one external face.

Successive cleaning zones lengthen exposure without requiring a stationary batch cycle.

Ceiling nozzles can cover garments as operators change orientation at the turns.

Returns at both bends reduce particle accumulation in internal corners.

Zoned fan sections support more even pressure across the two legs.

Обеспокоенность клиентов продуктами

A folded route must avoid stagnant corners and prevent the remote cleaning leg from becoming a low-pressure zone.

The two connected rooms are located on the same wall with no straight route.A U-shaped enclosure returns traffic after two controlled turns.

Lint builds up in inner corners when returns are only at the entrance.Dedicated return grilles at both bends collect contamination locally.

Remote nozzle rows lose pressure through a long common plenum.Zoned blower-filter sections supply each leg through shorter duct paths.

Users may be uncertain of the direction through a folded chamber.Sequential indicators can identify entry, cleaning route and clean-side exit.

Типичные приложения

Same-wall gowning connectionsSpace-constrained retrofitsPharmaceutical corridor reconfigurationControlled laboratory entrances

Технические параметры

Representative construction ranges for a U-shaped personnel air shower are listed below.

Основной материал	Multi-zone insulated steel enclosure with H13 HEPA fan sections, stainless nozzles and corner return-air plenums
Толщина панели	50-75 mm modular wall and divider panels
эффективная ширина	900-1500 mm clear width along each U-shaped passage leg
Максимальная длина	Up to 4500 mm overall folded enclosure length
Толщина линий стали	1.2-1.5 mm steel facing at dividers, returns and door frames
Плотность ядра	60-90 kg/m³ composite mineral insulation
Теплопроводимость	0.032-0.042 W/(m·K) for the insulated partition construction
Поверхностная отделка	Light-colour cleanroom powder coating with abrasion-resistant corner guards
Объединенный тип	Bolted U-module junctions with sealed divider edges and sequence-controlled door interlocks
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Clockwise or counter-clockwise routeTwo or three cleaning zonesTraffic-direction lightsEmergency release at outer doors

Planning a U-Shaped Cleanroom Air Shower specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой