Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Personal und Material Dekontamination Ausrüstung
U-Shaped Cleanroom Air Dusche
A folded 180-degree air shower route that returns the clean-side exit to the same side as the entrance while extending the cleaning path.
- 180-Degree Return Route
- Same-Side Openings
- Extended Air Exposure
- Zoned Corner Returns
Produkteinführung
The U-shaped air shower uses two internal turns to connect both controlled openings to the same face of the enclosure. Directional nozzle zones follow the folded route, while returns at the bends collect dust close to where it is dislodged. This configuration supports facility retrofits where neither a straight nor an L-shaped transfer path can connect the gowning and clean areas.
Key Features
Successive cleaning zones lengthen exposure without requiring a stationary batch cycle.
Ceiling nozzles can cover garments as operators change orientation at the turns.
Returns at both bends reduce particle accumulation in internal corners.
Zoned fan sections support more even pressure across the two legs.
Kunden Produktbedenken
A folded route must avoid stagnant corners and prevent the remote cleaning leg from becoming a low-pressure zone.
The two connected rooms are located on the same wall with no straight route.A U-shaped enclosure returns traffic after two controlled turns.
Lint builds up in inner corners when returns are only at the entrance.Dedicated return grilles at both bends collect contamination locally.
Remote nozzle rows lose pressure through a long common plenum.Zoned blower-filter sections supply each leg through shorter duct paths.
Users may be uncertain of the direction through a folded chamber.Sequential indicators can identify entry, cleaning route and clean-side exit.
Typische Anwendungen
Same-wall gowning connectionsSpace-constrained retrofitsPharmaceutical corridor reconfigurationControlled laboratory entrances
Technische Parameter
Representative construction ranges for a U-shaped personnel air shower are listed below.
| Core Material | Multi-zone insulated steel enclosure with H13 HEPA fan sections, stainless nozzles and corner return-air plenums |
|---|---|
| Panel Dicke | 50-75 mm modular wall and divider panels |
| Effektive Breite | 900-1500 mm clear width along each U-shaped passage leg |
| Maximale Länge | Up to 4500 mm overall folded enclosure length |
| Stahl facing Dicke | 1.2-1.5 mm steel facing at dividers, returns and door frames |
| Kerndichte | 60-90 kg/m³ composite mineral insulation |
| Thermische Leitfähigkeit | 0.032-0.042 W/(m·K) for the insulated partition construction |
| Oberfläche Finish | Light-colour cleanroom powder coating with abrasion-resistant corner guards |
| Gemeinsamer Typ | Bolted U-module junctions with sealed divider edges and sequence-controlled door interlocks |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Clockwise or counter-clockwise routeTwo or three cleaning zonesTraffic-direction lightsEmergency release at outer doors
Planning a U-Shaped Cleanroom Air Shower specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
