Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Fluxo laminar e equipamentos de contenção
Carrinho de transferência de fluxo laminar
An enclosed wheeled cart that maintains downward HEPA-filtered airflow around clean parts while they move between controlled areas.
- Filtered Air During Transfer
- Perforated Adjustable Shelves
- Gasketed Access Doors
- Battery Power Option
Introdução do produto
The transfer cart encloses materials within a positive filtered-air cabinet mounted on heavy-duty cleanroom casters. A top fan-filter unit supplies downward air through perforated adjustable shelves and exhausts at the lower cabinet level. Gasketed doors reduce room-air entry during movement, while an optional battery or UPS maintains the blower when the cart is disconnected from wall power. The cart protects clean contents; it is not a containment carrier for hazardous materials.
Características-chave
Top-down airflow directs particles toward low exhaust openings rather than across stored parts.
Gasketed doors and compression latches limit unfiltered air entry during transit.
Large non-shedding casters and ergonomic handles support controlled corridor movement.
A battery-status alarm can warn before the fan supply is interrupted.
Preocupações do produto do cliente
Clean materials are vulnerable when they leave one controlled room and pass through a less-controlled corridor or staging area.
Open carts expose parts to corridor particles.A sealed cabinet surrounds the load with downward HEPA-filtered air.
Solid shelves block airflow to lower levels.Perforated adjustable shelves preserve the vertical clean-air path.
The fan stops as soon as wall power is unplugged.An optional onboard battery or UPS supports the transfer interval.
Door gaps admit unfiltered air during movement.Continuous gaskets and compression latches secure each access door.
Aplicações típicas
Sterile component transferClean tool movementSemiconductor cassette transportMedical-device subassembly transfer
Parâmetros técnicos
Typical configurable construction ranges for a laminar flow transfer cart are listed below.
| Material principal | SUS304 cabinet and perforated shelves with a powder-coated steel or stainless fan-filter housing |
|---|---|
| Painel de espessura | 25-40 mm double-skin door and roof sections |
| Largura efetiva | 600-1200 mm usable cabinet width |
| Comprimento máximo | Up to 2200 mm overall cart height |
| Aço enfrentando espessura | 1.0-1.5 mm SUS304 cabinet skins and shelves |
| Densidade Core | Approximately 7900 kg/m³ for stainless steel structural components |
| Condutividade térmica | 14 - 16 W / (m · K) para aço inoxidável SUS304 |
| Superfície acabado | Brushed SUS304 with smooth door liners and cleanroom-compatible caster hardware |
| Tipo conjunto | Welded cabinet seams with gasketed compression-latched doors and bolted perforated shelf rails |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Single or double-sided doorsBattery and charger moduleTwo to ten storage compartmentsElectropolished stainless construction
Planejamento de uma especificação de Carrinho de Transferência de Fluxo Laminar?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
