Enclosed laminar flow transfer cart with top fan filter and sealed doors

Aliran Laminar dan Peralatan Pengekangan

Pemindahan Aliran Laminar Cart

An enclosed wheeled cart that maintains downward HEPA-filtered airflow around clean parts while they move between controlled areas.

Filtered Air During Transfer
Perforated Adjustable Shelves
Gasketed Access Doors
Battery Power Option

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The transfer cart encloses materials within a positive filtered-air cabinet mounted on heavy-duty cleanroom casters. A top fan-filter unit supplies downward air through perforated adjustable shelves and exhausts at the lower cabinet level. Gasketed doors reduce room-air entry during movement, while an optional battery or UPS maintains the blower when the cart is disconnected from wall power. The cart protects clean contents; it is not a containment carrier for hazardous materials.

Ciri-ciri Utama

Perforated shelves allow filtered air to reach every storage level.

Top-down airflow directs particles toward low exhaust openings rather than across stored parts.

Gasketed doors and compression latches limit unfiltered air entry during transit.

Large non-shedding casters and ergonomic handles support controlled corridor movement.

A battery-status alarm can warn before the fan supply is interrupted.

Kebimbangan Produk Pelanggan

Clean materials are vulnerable when they leave one controlled room and pass through a less-controlled corridor or staging area.

Open carts expose parts to corridor particles.A sealed cabinet surrounds the load with downward HEPA-filtered air.

Solid shelves block airflow to lower levels.Perforated adjustable shelves preserve the vertical clean-air path.

The fan stops as soon as wall power is unplugged.An optional onboard battery or UPS supports the transfer interval.

Door gaps admit unfiltered air during movement.Continuous gaskets and compression latches secure each access door.

Permohonan yang biasa

Pemindahan komponen sterilClean tool movementSemiconductor cassette transportMedical-device subassembly transfer

Parameter teknikal

Typical configurable construction ranges for a laminar flow transfer cart are listed below.

Bahan Teras	SUS304 cabinet and perforated shelves with a powder-coated steel or stainless fan-filter housing
Ketebalan Panel	25-40 mm double-skin door and roof sections
Lebar berkesan	600-1200 mm usable cabinet width
Panjang maksimum	Up to 2200 mm overall cart height
Keluli Menghadapi Ketebalan	1.0-1.5 mm SUS304 cabinet skins and shelves
Ketumpatan teras	Approximately 7900 kg/m³ for stainless steel structural components
Kekonduksian Terma	14-16 W/(m·K) for SUS304 stainless steel
Kemasan permukaan	Brushed SUS304 with smooth door liners and cleanroom-compatible caster hardware
Jenis Bersatu	Welded cabinet seams with gasketed compression-latched doors and bolted perforated shelf rails
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Single or double-sided doorsBattery and charger moduleTwo to ten storage compartmentsElectropolished stainless construction

Merancang spesifikasi Kereta Pemindahan Aliran Laminar?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami