Enclosed laminar flow transfer cart with top fan filter and sealed doors

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

층층 흐름 전송 카트

An enclosed wheeled cart that maintains downward HEPA-filtered airflow around clean parts while they move between controlled areas.

Filtered Air During Transfer
Perforated Adjustable Shelves
Gasketed Access Doors
Battery Power Option

견적 요청 제품 찾아보기

상품 소개

The transfer cart encloses materials within a positive filtered-air cabinet mounted on heavy-duty cleanroom casters. A top fan-filter unit supplies downward air through perforated adjustable shelves and exhausts at the lower cabinet level. Gasketed doors reduce room-air entry during movement, while an optional battery or UPS maintains the blower when the cart is disconnected from wall power. The cart protects clean contents; it is not a containment carrier for hazardous materials.

주요 기능

Perforated shelves allow filtered air to reach every storage level.

Top-down airflow directs particles toward low exhaust openings rather than across stored parts.

Gasketed doors and compression latches limit unfiltered air entry during transit.

Large non-shedding casters and ergonomic handles support controlled corridor movement.

A battery-status alarm can warn before the fan supply is interrupted.

고객 제품 관심사

Clean materials are vulnerable when they leave one controlled room and pass through a less-controlled corridor or staging area.

Open carts expose parts to corridor particles.A sealed cabinet surrounds the load with downward HEPA-filtered air.

Solid shelves block airflow to lower levels.Perforated adjustable shelves preserve the vertical clean-air path.

The fan stops as soon as wall power is unplugged.An optional onboard battery or UPS supports the transfer interval.

Door gaps admit unfiltered air during movement.Continuous gaskets and compression latches secure each access door.

일반적인 응용 프로그램

무균 구성 요소 전송Clean tool movementSemiconductor cassette transportMedical-device subassembly transfer

기술 매개변수

Typical configurable construction ranges for a laminar flow transfer cart are listed below.

핵심 재료	SUS304 cabinet and perforated shelves with a powder-coated steel or stainless fan-filter housing
패널 두께	25-40 mm double-skin door and roof sections
유효 폭	600-1200 mm usable cabinet width
최대 길이	Up to 2200 mm overall cart height
강철 면면 두께	1.0-1.5 mm SUS304 cabinet skins and shelves
코어 밀도	Approximately 7900 kg/m³ for stainless steel structural components
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) SUS 304 스테인레스 스틸
표면 마무리	Brushed SUS304 with smooth door liners and cleanroom-compatible caster hardware
접합 유형	Welded cabinet seams with gasketed compression-latched doors and bolted perforated shelf rails
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single or double-sided doorsBattery and charger moduleTwo to ten storage compartmentsElectropolished stainless construction

Laminar Flow Transfer Cart 사양을 계획하고 있습니까?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.