Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Équipement d'écoulement et de confinement laminaires
Cart de transfert de flux laminaire
An enclosed wheeled cart that maintains downward HEPA-filtered airflow around clean parts while they move between controlled areas.
- Filtered Air During Transfer
- Perforated Adjustable Shelves
- Gasketed Access Doors
- Battery Power Option
Introduction de produit
The transfer cart encloses materials within a positive filtered-air cabinet mounted on heavy-duty cleanroom casters. A top fan-filter unit supplies downward air through perforated adjustable shelves and exhausts at the lower cabinet level. Gasketed doors reduce room-air entry during movement, while an optional battery or UPS maintains the blower when the cart is disconnected from wall power. The cart protects clean contents; it is not a containment carrier for hazardous materials.
Key Features
Top-down airflow directs particles toward low exhaust openings rather than across stored parts.
Gasketed doors and compression latches limit unfiltered air entry during transit.
Large non-shedding casters and ergonomic handles support controlled corridor movement.
A battery-status alarm can warn before the fan supply is interrupted.
Préoccupations du client produit
Clean materials are vulnerable when they leave one controlled room and pass through a less-controlled corridor or staging area.
Open carts expose parts to corridor particles.A sealed cabinet surrounds the load with downward HEPA-filtered air.
Solid shelves block airflow to lower levels.Perforated adjustable shelves preserve the vertical clean-air path.
The fan stops as soon as wall power is unplugged.An optional onboard battery or UPS supports the transfer interval.
Door gaps admit unfiltered air during movement.Continuous gaskets and compression latches secure each access door.
Les applications typiques
Transferts de composants stérilesClean tool movementSemiconductor cassette transportMedical-device subassembly transfer
Paramètres techniques
Typical configurable construction ranges for a laminar flow transfer cart are listed below.
| Matériaux de base | SUS304 cabinet and perforated shelves with a powder-coated steel or stainless fan-filter housing |
|---|---|
| Panneau épaisseur | 25-40 mm double-skin door and roof sections |
| Largeur effective | 600-1200 mm usable cabinet width |
| Longueur maximale | Up to 2200 mm overall cart height |
| Acier face épaisseur | 1.0-1.5 mm SUS304 cabinet skins and shelves |
| Densité Core | Approximately 7900 kg/m³ for stainless steel structural components |
| Conductivité thermique | 14 - 16 W / (m · K) pour l'acier inoxydable SUS304 |
| surface finie | Brushed SUS304 with smooth door liners and cleanroom-compatible caster hardware |
| Type joint | Welded cabinet seams with gasketed compression-latched doors and bolted perforated shelf rails |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Single or double-sided doorsBattery and charger moduleTwo to ten storage compartmentsElectropolished stainless construction
Planifier une spécification de chariot de transfert de flux laminar ? par
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
