Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de flujo laminar y contención
Carro de transferencia de flujo laminar
An enclosed wheeled cart that maintains downward HEPA-filtered airflow around clean parts while they move between controlled areas.
- Filtered Air During Transfer
- Perforated Adjustable Shelves
- Gasketed Access Doors
- Battery Power Option
Introducción del producto
The transfer cart encloses materials within a positive filtered-air cabinet mounted on heavy-duty cleanroom casters. A top fan-filter unit supplies downward air through perforated adjustable shelves and exhausts at the lower cabinet level. Gasketed doors reduce room-air entry during movement, while an optional battery or UPS maintains the blower when the cart is disconnected from wall power. The cart protects clean contents; it is not a containment carrier for hazardous materials.
Características clave
Top-down airflow directs particles toward low exhaust openings rather than across stored parts.
Gasketed doors and compression latches limit unfiltered air entry during transit.
Large non-shedding casters and ergonomic handles support controlled corridor movement.
A battery-status alarm can warn before the fan supply is interrupted.
Preocupaciones del producto del cliente
Clean materials are vulnerable when they leave one controlled room and pass through a less-controlled corridor or staging area.
Open carts expose parts to corridor particles.A sealed cabinet surrounds the load with downward HEPA-filtered air.
Solid shelves block airflow to lower levels.Perforated adjustable shelves preserve the vertical clean-air path.
The fan stops as soon as wall power is unplugged.An optional onboard battery or UPS supports the transfer interval.
Door gaps admit unfiltered air during movement.Continuous gaskets and compression latches secure each access door.
Aplicaciones típicas
Sterile component transferClean tool movementSemiconductor cassette transportMedical-device subassembly transfer
Parámetros técnicos
Typical configurable construction ranges for a laminar flow transfer cart are listed below.
| Materiales Core | SUS304 cabinet and perforated shelves with a powder-coated steel or stainless fan-filter housing |
|---|---|
| Panel de espesor | 25-40 mm double-skin door and roof sections |
| Ancho efectivo | 600-1200 mm usable cabinet width |
| Longitud máxima | Up to 2200 mm overall cart height |
| Acero frente a espesor | 1.0-1.5 mm SUS304 cabinet skins and shelves |
| Densidad Core | Approximately 7900 kg/m³ for stainless steel structural components |
| Conductividad térmica | 14 - 16 W / (m · K) para acero inoxidable SUS304 |
| Superficie acabada | Brushed SUS304 with smooth door liners and cleanroom-compatible caster hardware |
| Tipo conjunto | Welded cabinet seams with gasketed compression-latched doors and bolted perforated shelf rails |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Single or double-sided doorsBattery and charger moduleTwo to ten storage compartmentsElectropolished stainless construction
¿Está planeando una especificación de carro de transferencia de flujo laminar?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
