İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Laminar Flow ve Containment Equipment
Seçici Laminar Flow Transfer
An enclosed wheeled cart that maintains downward HEPA-filtered airflow around clean parts while they move between controlled areas.
- Filtered Air During Transfer
- Perforated Adjustable Shelves
- Gasketed Access Doors
- Battery Power Option
Ürün tanıtımı
The transfer cart encloses materials within a positive filtered-air cabinet mounted on heavy-duty cleanroom casters. A top fan-filter unit supplies downward air through perforated adjustable shelves and exhausts at the lower cabinet level. Gasketed doors reduce room-air entry during movement, while an optional battery or UPS maintains the blower when the cart is disconnected from wall power. The cart protects clean contents; it is not a containment carrier for hazardous materials.
Ana Özellikler
Top-down airflow directs particles toward low exhaust openings rather than across stored parts.
Gasketed doors and compression latches limit unfiltered air entry during transit.
Large non-shedding casters and ergonomic handles support controlled corridor movement.
A battery-status alarm can warn before the fan supply is interrupted.
Müşteri Ürün Sorunları
Clean materials are vulnerable when they leave one controlled room and pass through a less-controlled corridor or staging area.
Open carts expose parts to corridor particles.A sealed cabinet surrounds the load with downward HEPA-filtered air.
Solid shelves block airflow to lower levels.Perforated adjustable shelves preserve the vertical clean-air path.
The fan stops as soon as wall power is unplugged.An optional onboard battery or UPS supports the transfer interval.
Door gaps admit unfiltered air during movement.Continuous gaskets and compression latches secure each access door.
Tipik uygulamalar
Sterile component transferClean tool movementSemiconductor cassette transportMedical-device subassembly transfer
Teknik parametreler
Typical configurable construction ranges for a laminar flow transfer cart are listed below.
| Temel malzemeler | SUS304 cabinet and perforated shelves with a powder-coated steel or stainless fan-filter housing |
|---|---|
| Panel kalınlığı | 25-40 mm double-skin door and roof sections |
| Effective Width (Etkili Genişlik) | 600-1200 mm usable cabinet width |
| Maksimum uzunluk | Up to 2200 mm overall cart height |
| Çelik yüz yüze kalınlığı | 1.0-1.5 mm SUS304 cabinet skins and shelves |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7900 kg/m³ for stainless steel structural components |
| Termal İletkenlik | 14-16 W/(m·K) for SUS304 stainless steel |
| Yüzey bitirme | Brushed SUS304 with smooth door liners and cleanroom-compatible caster hardware |
| Ortak tip | Welded cabinet seams with gasketed compression-latched doors and bolted perforated shelf rails |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Single or double-sided doorsBattery and charger moduleTwo to ten storage compartmentsElectropolished stainless construction
Bir Laminar Flow Transfer Sepeti özelliklerini planlıyor musunuz?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
