English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات التدفق والاحتواء الصفائحية
Laminar تدفق نقل العربة
An enclosed wheeled cart that maintains downward HEPA-filtered airflow around clean parts while they move between controlled areas.
- Filtered Air During Transfer
- Perforated Adjustable Shelves
- Gasketed Access Doors
- Battery Power Option
مقدمة المنتج
The transfer cart encloses materials within a positive filtered-air cabinet mounted on heavy-duty cleanroom casters. A top fan-filter unit supplies downward air through perforated adjustable shelves and exhausts at the lower cabinet level. Gasketed doors reduce room-air entry during movement, while an optional battery or UPS maintains the blower when the cart is disconnected from wall power. The cart protects clean contents; it is not a containment carrier for hazardous materials.
الخصائص الرئيسية
Top-down airflow directs particles toward low exhaust openings rather than across stored parts.
Gasketed doors and compression latches limit unfiltered air entry during transit.
Large non-shedding casters and ergonomic handles support controlled corridor movement.
A battery-status alarm can warn before the fan supply is interrupted.
مخاوف المنتج للعملاء
Clean materials are vulnerable when they leave one controlled room and pass through a less-controlled corridor or staging area.
Open carts expose parts to corridor particles.A sealed cabinet surrounds the load with downward HEPA-filtered air.
Solid shelves block airflow to lower levels.Perforated adjustable shelves preserve the vertical clean-air path.
The fan stops as soon as wall power is unplugged.An optional onboard battery or UPS supports the transfer interval.
Door gaps admit unfiltered air during movement.Continuous gaskets and compression latches secure each access door.
تطبيقات نموذجية
نقل المكونات المعقمةClean tool movementSemiconductor cassette transportMedical-device subassembly transfer
المعلمات الفنية
Typical configurable construction ranges for a laminar flow transfer cart are listed below.
| المواد الأساسية | SUS304 cabinet and perforated shelves with a powder-coated steel or stainless fan-filter housing |
|---|---|
| سمك اللوحة | 25-40 mm double-skin door and roof sections |
| العرض الفعال | 600-1200 mm usable cabinet width |
| الحد الأقصى الطول | Up to 2200 mm overall cart height |
| الصلب يواجه سمك | 1.0-1.5 mm SUS304 cabinet skins and shelves |
| الكثافة الأساسية | Approximately 7900 kg/m³ for stainless steel structural components |
| الموصلية الحرارية | 14-16 W/(m·K) for SUS304 stainless steel |
| إنهاء السطح | Brushed SUS304 with smooth door liners and cleanroom-compatible caster hardware |
| نوع المشترك | Welded cabinet seams with gasketed compression-latched doors and bolted perforated shelf rails |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Single or double-sided doorsBattery and charger moduleTwo to ten storage compartmentsElectropolished stainless construction
التخطيط لمواصفات عربة نقل التدفق الخفجي؟
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
