Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Aliran Laminar dan Peralatan Penahanan
Gerobak Transfer Aliran Laminar
An enclosed wheeled cart that maintains downward HEPA-filtered airflow around clean parts while they move between controlled areas.
- Filtered Air During Transfer
- Perforated Adjustable Shelves
- Gasketed Access Doors
- Battery Power Option
Perkenalan produk
The transfer cart encloses materials within a positive filtered-air cabinet mounted on heavy-duty cleanroom casters. A top fan-filter unit supplies downward air through perforated adjustable shelves and exhausts at the lower cabinet level. Gasketed doors reduce room-air entry during movement, while an optional battery or UPS maintains the blower when the cart is disconnected from wall power. The cart protects clean contents; it is not a containment carrier for hazardous materials.
Fitur utama:
Top-down airflow directs particles toward low exhaust openings rather than across stored parts.
Gasketed doors and compression latches limit unfiltered air entry during transit.
Large non-shedding casters and ergonomic handles support controlled corridor movement.
A battery-status alarm can warn before the fan supply is interrupted.
Kekhawatiran produk pelanggan
Clean materials are vulnerable when they leave one controlled room and pass through a less-controlled corridor or staging area.
Open carts expose parts to corridor particles.A sealed cabinet surrounds the load with downward HEPA-filtered air.
Solid shelves block airflow to lower levels.Perforated adjustable shelves preserve the vertical clean-air path.
The fan stops as soon as wall power is unplugged.An optional onboard battery or UPS supports the transfer interval.
Door gaps admit unfiltered air during movement.Continuous gaskets and compression latches secure each access door.
Aplikasi yang Tipis
Transfer Komponen SterilClean tool movementSemiconductor cassette transportMedical-device subassembly transfer
Parameter teknis
Typical configurable construction ranges for a laminar flow transfer cart are listed below.
| Bahan inti | SUS304 cabinet and perforated shelves with a powder-coated steel or stainless fan-filter housing |
|---|---|
| Ketebalan Panel (Panel Thickness) | 25-40 mm double-skin door and roof sections |
| Efektif lebar | 600-1200 mm usable cabinet width |
| Panjang maksimum | Up to 2200 mm overall cart height |
| Baja menghadap ketebalan | 1.0-1.5 mm SUS304 cabinet skins and shelves |
| Kepadatan inti (core density) | Approximately 7900 kg/m³ for stainless steel structural components |
| Konduktivitas Termal (Thermal Conductivity) | 14 - 16 W / (m · K) untuk baja tahan karat SUS304 |
| Permukaan selesai | Brushed SUS304 with smooth door liners and cleanroom-compatible caster hardware |
| Jenis Bersama | Welded cabinet seams with gasketed compression-latched doors and bolted perforated shelf rails |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Single or double-sided doorsBattery and charger moduleTwo to ten storage compartmentsElectropolished stainless construction
Merencanakan spesifikasi Laminar Flow Transfer Cart?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
