Enclosed laminar flow transfer cart with top fan filter and sealed doors

層流 · 封じ込め装置

Laminar の流れの移送カート

An enclosed wheeled cart that maintains downward HEPA-filtered airflow around clean parts while they move between controlled areas.

Filtered Air During Transfer
Perforated Adjustable Shelves
Gasketed Access Doors
Battery Power Option

見積もりリクエスト製品案内

商品紹介

The transfer cart encloses materials within a positive filtered-air cabinet mounted on heavy-duty cleanroom casters. A top fan-filter unit supplies downward air through perforated adjustable shelves and exhausts at the lower cabinet level. Gasketed doors reduce room-air entry during movement, while an optional battery or UPS maintains the blower when the cart is disconnected from wall power. The cart protects clean contents; it is not a containment carrier for hazardous materials.

主要な特徴

Perforated shelves allow filtered air to reach every storage level.

Top-down airflow directs particles toward low exhaust openings rather than across stored parts.

Gasketed doors and compression latches limit unfiltered air entry during transit.

Large non-shedding casters and ergonomic handles support controlled corridor movement.

A battery-status alarm can warn before the fan supply is interrupted.

お客様の製品に関する懸念事項

Clean materials are vulnerable when they leave one controlled room and pass through a less-controlled corridor or staging area.

Open carts expose parts to corridor particles.A sealed cabinet surrounds the load with downward HEPA-filtered air.

Solid shelves block airflow to lower levels.Perforated adjustable shelves preserve the vertical clean-air path.

The fan stops as soon as wall power is unplugged.An optional onboard battery or UPS supports the transfer interval.

Door gaps admit unfiltered air during movement.Continuous gaskets and compression latches secure each access door.

典型的な用途

Sterile component transferClean tool movementSemiconductor cassette transportMedical-device subassembly transfer

技術的なパラメータ

Typical configurable construction ranges for a laminar flow transfer cart are listed below.

コア材料	SUS304 cabinet and perforated shelves with a powder-coated steel or stainless fan-filter housing
パネルの厚さ	25-40 mm double-skin door and roof sections
有効幅	600-1200 mm usable cabinet width
最大長さ	Up to 2200 mm overall cart height
鋼鉄の厚さを直面する	1.0-1.5 mm SUS304 cabinet skins and shelves
コア密度	Approximately 7900 kg/m³ for stainless steel structural components
熱伝導率	14 — 16 W / （ m · K ） SUS304 ステンレス鋼
表面仕上げ	Brushed SUS304 with smooth door liners and cleanroom-compatible caster hardware
ジョイントタイプ	Welded cabinet seams with gasketed compression-latched doors and bolted perforated shelf rails
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single or double-sided doorsBattery and charger moduleTwo to ten storage compartmentsElectropolished stainless construction

層流転送カートの仕様を計画していますか？

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する