Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Fluxo laminar e equipamentos de contenção
Bench de limpeza de fluxo laminar de operador duplo
A wide clean bench with a continuous filtered work area that gives two operators independent reach zones without dividing the protected surface.
- Two Independent Reach Zones
- Continuous Clean Worktop
- Wide Uniform Air Supply
- Split Utility Access
Introdução do produto
The dual-operator bench extends the filter, diffuser and worktop across two working positions. Each operator receives a dedicated lighting and utility area while the continuous stainless surface supports shared trays or long assemblies. Internal fan balancing keeps the air supply even across the wider span, and a stiffened front beam limits deflection above the opening. The design is for non-hazardous product-protection work requiring coordinated two-person handling.
Características-chave
Separate utility panels reduce hose and cable crossing over shared work.
The continuous stainless worktop supports long assemblies and coordinated transfers.
Dual lighting sections reduce shadows created by two operators working side by side.
A reinforced front beam maintains sash alignment across the wider cabinet opening.
Preocupações do produto do cliente
A two-person clean bench must preserve uniform airflow across a wide opening while separating utilities and operator movements.
Air velocity drops at the center of a wide work zone.Balanced fan branches and a continuous diffuser distribute supply across both positions.
Cables from two operators cross the shared process area.Left and right service panels keep utilities within each operator's reach zone.
A jointed worktop interrupts long assemblies.A continuous reinforced stainless surface spans the dual working width.
The long sash rail can sag and bind.A stiffened front structure supports accurate sash travel across the full opening.
Aplicações típicas
Large medical-device assemblyTwo-person sterile set preparationLong optical component handlingCollaborative electronics inspection
Parâmetros técnicos
Typical configurable construction ranges for a dual-operator laminar flow clean bench are listed below.
| Material principal | SUS304 continuous work surface with reinforced powder-coated steel enclosure and mineral-wool acoustic infill |
|---|---|
| Painel de espessura | 30-50 mm reinforced double-skin sections |
| Largura efetiva | 1500-2400 mm clear working width |
| Comprimento máximo | Up to 2600 mm overall bench width |
| Aço enfrentando espessura | Aço externo de 1,0 - 1,2 mm; mesa de trabalho de 1,2 - 1,5 mm SUS304 |
| Densidade Core | 80 - 120 kg / m3 de enchimento acústico de lã mineral |
| Condutividade térmica | 0.035-0.045 W/(m·K) for the mineral-wool infill |
| Superfície acabado | White powder-coated enclosure with brushed continuous SUS304 work surface |
| Tipo conjunto | Reinforced sealed cabinet seams with a full-width filter clamp and continuous worktop support |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Two independent utility panelsMotorized full-width sashDual blower monitoringSit-stand base configuration
Planning a Dual-Operator Laminar Flow Clean Bench specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
