Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Aliran Laminar dan Peralatan Penahanan
Dual Operator Laminar Flow Clean Bench
A wide clean bench with a continuous filtered work area that gives two operators independent reach zones without dividing the protected surface.
- Two Independent Reach Zones
- Continuous Clean Worktop
- Wide Uniform Air Supply
- Split Utility Access
Perkenalan produk
The dual-operator bench extends the filter, diffuser and worktop across two working positions. Each operator receives a dedicated lighting and utility area while the continuous stainless surface supports shared trays or long assemblies. Internal fan balancing keeps the air supply even across the wider span, and a stiffened front beam limits deflection above the opening. The design is for non-hazardous product-protection work requiring coordinated two-person handling.
Fitur utama:
Separate utility panels reduce hose and cable crossing over shared work.
The continuous stainless worktop supports long assemblies and coordinated transfers.
Dual lighting sections reduce shadows created by two operators working side by side.
A reinforced front beam maintains sash alignment across the wider cabinet opening.
Kekhawatiran produk pelanggan
A two-person clean bench must preserve uniform airflow across a wide opening while separating utilities and operator movements.
Air velocity drops at the center of a wide work zone.Balanced fan branches and a continuous diffuser distribute supply across both positions.
Cables from two operators cross the shared process area.Left and right service panels keep utilities within each operator's reach zone.
A jointed worktop interrupts long assemblies.A continuous reinforced stainless surface spans the dual working width.
The long sash rail can sag and bind.A stiffened front structure supports accurate sash travel across the full opening.
Aplikasi yang Tipis
Large medical-device assemblyTwo-person sterile set preparationLong optical component handlingCollaborative electronics inspection
Parameter teknis
Typical configurable construction ranges for a dual-operator laminar flow clean bench are listed below.
| Bahan inti | SUS304 continuous work surface with reinforced powder-coated steel enclosure and mineral-wool acoustic infill |
|---|---|
| Ketebalan Panel (Panel Thickness) | 30-50 mm reinforced double-skin sections |
| Efektif lebar | 1500-2400 mm clear working width |
| Panjang maksimum | Up to 2600 mm overall bench width |
| Baja menghadap ketebalan | baja luar 1,0 - 1,2 mm; worktop SUS304 1,2 - 1,5 mm |
| Kepadatan inti (core density) | 80 - 120 kg / m3 mineral-wol akustik infill |
| Konduktivitas Termal (Thermal Conductivity) | 0.035-0.045 W/(m·K) for the mineral-wool infill |
| Permukaan selesai | White powder-coated enclosure with brushed continuous SUS304 work surface |
| Jenis Bersama | Reinforced sealed cabinet seams with a full-width filter clamp and continuous worktop support |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Two independent utility panelsMotorized full-width sashDual blower monitoringSit-stand base configuration
Planning a Dual-Operator Laminar Flow Clean Bench specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
