Wide dual-operator laminar flow clean bench shown in three-quarter view

Aliran Laminar dan Peralatan Pengekangan

Dual-Operator Laminar Aliran Bersih Bench

A wide clean bench with a continuous filtered work area that gives two operators independent reach zones without dividing the protected surface.

Two Independent Reach Zones
Continuous Clean Worktop
Wide Uniform Air Supply
Split Utility Access

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The dual-operator bench extends the filter, diffuser and worktop across two working positions. Each operator receives a dedicated lighting and utility area while the continuous stainless surface supports shared trays or long assemblies. Internal fan balancing keeps the air supply even across the wider span, and a stiffened front beam limits deflection above the opening. The design is for non-hazardous product-protection work requiring coordinated two-person handling.

Ciri-ciri Utama

A full-width diffuser avoids a weak central zone between the two operator positions.

Separate utility panels reduce hose and cable crossing over shared work.

The continuous stainless worktop supports long assemblies and coordinated transfers.

Dual lighting sections reduce shadows created by two operators working side by side.

A reinforced front beam maintains sash alignment across the wider cabinet opening.

Kebimbangan Produk Pelanggan

A two-person clean bench must preserve uniform airflow across a wide opening while separating utilities and operator movements.

Air velocity drops at the center of a wide work zone.Balanced fan branches and a continuous diffuser distribute supply across both positions.

Cables from two operators cross the shared process area.Left and right service panels keep utilities within each operator's reach zone.

A jointed worktop interrupts long assemblies.A continuous reinforced stainless surface spans the dual working width.

The long sash rail can sag and bind.A stiffened front structure supports accurate sash travel across the full opening.

Permohonan yang biasa

Large medical-device assemblyTwo-person sterile set preparationLong optical component handlingCollaborative electronics inspection

Parameter teknikal

Typical configurable construction ranges for a dual-operator laminar flow clean bench are listed below.

Bahan Teras	SUS304 continuous work surface with reinforced powder-coated steel enclosure and mineral-wool acoustic infill
Ketebalan Panel	30-50 mm reinforced double-skin sections
Lebar berkesan	1500-2400 mm clear working width
Panjang maksimum	Up to 2600 mm overall bench width
Keluli Menghadapi Ketebalan	1.0-1.2 mm keluli luar; 1.2-1.5 mm worktop SUS304
Ketumpatan teras	80-120 kg / m3 mineral-wool infill akustik
Kekonduksian Terma	0.035-0.045 W/(m·K) for the mineral-wool infill
Kemasan permukaan	White powder-coated enclosure with brushed continuous SUS304 work surface
Jenis Bersatu	Reinforced sealed cabinet seams with a full-width filter clamp and continuous worktop support
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Two independent utility panelsMotorized full-width sashDual blower monitoringSit-stand base configuration

Planning a Dual-Operator Laminar Flow Clean Bench specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami