İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Laminar Flow ve Containment Equipment
Çift Operatör Laminar Flow Temiz Bench
A wide clean bench with a continuous filtered work area that gives two operators independent reach zones without dividing the protected surface.
- Two Independent Reach Zones
- Continuous Clean Worktop
- Wide Uniform Air Supply
- Split Utility Access
Ürün tanıtımı
The dual-operator bench extends the filter, diffuser and worktop across two working positions. Each operator receives a dedicated lighting and utility area while the continuous stainless surface supports shared trays or long assemblies. Internal fan balancing keeps the air supply even across the wider span, and a stiffened front beam limits deflection above the opening. The design is for non-hazardous product-protection work requiring coordinated two-person handling.
Ana Özellikler
Separate utility panels reduce hose and cable crossing over shared work.
The continuous stainless worktop supports long assemblies and coordinated transfers.
Dual lighting sections reduce shadows created by two operators working side by side.
A reinforced front beam maintains sash alignment across the wider cabinet opening.
Müşteri Ürün Sorunları
A two-person clean bench must preserve uniform airflow across a wide opening while separating utilities and operator movements.
Air velocity drops at the center of a wide work zone.Balanced fan branches and a continuous diffuser distribute supply across both positions.
Cables from two operators cross the shared process area.Left and right service panels keep utilities within each operator's reach zone.
A jointed worktop interrupts long assemblies.A continuous reinforced stainless surface spans the dual working width.
The long sash rail can sag and bind.A stiffened front structure supports accurate sash travel across the full opening.
Tipik uygulamalar
Large medical-device assemblyTwo-person sterile set preparationLong optical component handlingCollaborative electronics inspection
Teknik parametreler
Typical configurable construction ranges for a dual-operator laminar flow clean bench are listed below.
| Temel malzemeler | SUS304 continuous work surface with reinforced powder-coated steel enclosure and mineral-wool acoustic infill |
|---|---|
| Panel kalınlığı | 30-50 mm reinforced double-skin sections |
| Effective Width (Etkili Genişlik) | 1500-2400 mm clear working width |
| Maksimum uzunluk | Up to 2600 mm overall bench width |
| Çelik yüz yüze kalınlığı | 1,0-1.2 mm dış çelik; 1,2-1.5 mm SUS304 çalışma üstü |
| Core Density (Çekirdek Yoğunluğu) | 80-120 kg / m3 mineral-yün akustik dolgu |
| Termal İletkenlik | 0.035-0.045 W/(m·K) for the mineral-wool infill |
| Yüzey bitirme | White powder-coated enclosure with brushed continuous SUS304 work surface |
| Ortak tip | Reinforced sealed cabinet seams with a full-width filter clamp and continuous worktop support |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Two independent utility panelsMotorized full-width sashDual blower monitoringSit-stand base configuration
Planning a Dual-Operator Laminar Flow Clean Bench specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
