Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Équipement d'écoulement et de confinement laminaires
Banc de nettoyage à flux laminaire à double opérateur par
A wide clean bench with a continuous filtered work area that gives two operators independent reach zones without dividing the protected surface.
- Two Independent Reach Zones
- Continuous Clean Worktop
- Wide Uniform Air Supply
- Split Utility Access
Introduction de produit
The dual-operator bench extends the filter, diffuser and worktop across two working positions. Each operator receives a dedicated lighting and utility area while the continuous stainless surface supports shared trays or long assemblies. Internal fan balancing keeps the air supply even across the wider span, and a stiffened front beam limits deflection above the opening. The design is for non-hazardous product-protection work requiring coordinated two-person handling.
Key Features
Separate utility panels reduce hose and cable crossing over shared work.
The continuous stainless worktop supports long assemblies and coordinated transfers.
Dual lighting sections reduce shadows created by two operators working side by side.
A reinforced front beam maintains sash alignment across the wider cabinet opening.
Préoccupations du client produit
A two-person clean bench must preserve uniform airflow across a wide opening while separating utilities and operator movements.
Air velocity drops at the center of a wide work zone.Balanced fan branches and a continuous diffuser distribute supply across both positions.
Cables from two operators cross the shared process area.Left and right service panels keep utilities within each operator's reach zone.
A jointed worktop interrupts long assemblies.A continuous reinforced stainless surface spans the dual working width.
The long sash rail can sag and bind.A stiffened front structure supports accurate sash travel across the full opening.
Les applications typiques
Large medical-device assemblyTwo-person sterile set preparationLong optical component handlingCollaborative electronics inspection
Paramètres techniques
Typical configurable construction ranges for a dual-operator laminar flow clean bench are listed below.
| Matériaux de base | SUS304 continuous work surface with reinforced powder-coated steel enclosure and mineral-wool acoustic infill |
|---|---|
| Panneau épaisseur | 30-50 mm reinforced double-skin sections |
| Largeur effective | 1500-2400 mm clear working width |
| Longueur maximale | Up to 2600 mm overall bench width |
| Acier face épaisseur | 1,0 - 1,2 mm d'acier extérieur ; 1,2 - 1,5 mm de plancher SUS304 par |
| Densité Core | 80 - 120 kg / m3 remplissage acoustique en laine minérale par |
| Conductivité thermique | 0,035 - 0,045 W / (m · K) pour le remplissage en laine minérale |
| surface finie | White powder-coated enclosure with brushed continuous SUS304 work surface |
| Type joint | Reinforced sealed cabinet seams with a full-width filter clamp and continuous worktop support |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Two independent utility panelsMotorized full-width sashDual blower monitoringSit-stand base configuration
Planning a Dual-Operator Laminar Flow Clean Bench specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
