Wide dual-operator laminar flow clean bench shown in three-quarter view

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

듀얼 오퍼레이터 레이미널 흐름 클린 벤치

A wide clean bench with a continuous filtered work area that gives two operators independent reach zones without dividing the protected surface.

Two Independent Reach Zones
Continuous Clean Worktop
Wide Uniform Air Supply
Split Utility Access

견적 요청 제품 찾아보기

상품 소개

The dual-operator bench extends the filter, diffuser and worktop across two working positions. Each operator receives a dedicated lighting and utility area while the continuous stainless surface supports shared trays or long assemblies. Internal fan balancing keeps the air supply even across the wider span, and a stiffened front beam limits deflection above the opening. The design is for non-hazardous product-protection work requiring coordinated two-person handling.

주요 기능

A full-width diffuser avoids a weak central zone between the two operator positions.

Separate utility panels reduce hose and cable crossing over shared work.

The continuous stainless worktop supports long assemblies and coordinated transfers.

Dual lighting sections reduce shadows created by two operators working side by side.

A reinforced front beam maintains sash alignment across the wider cabinet opening.

고객 제품 관심사

A two-person clean bench must preserve uniform airflow across a wide opening while separating utilities and operator movements.

Air velocity drops at the center of a wide work zone.Balanced fan branches and a continuous diffuser distribute supply across both positions.

Cables from two operators cross the shared process area.Left and right service panels keep utilities within each operator's reach zone.

A jointed worktop interrupts long assemblies.A continuous reinforced stainless surface spans the dual working width.

The long sash rail can sag and bind.A stiffened front structure supports accurate sash travel across the full opening.

일반적인 응용 프로그램

Large medical-device assemblyTwo-person sterile set preparationLong optical component handlingCollaborative electronics inspection

기술 매개변수

Typical configurable construction ranges for a dual-operator laminar flow clean bench are listed below.

핵심 재료	SUS304 continuous work surface with reinforced powder-coated steel enclosure and mineral-wool acoustic infill
패널 두께	30-50 mm reinforced double-skin sections
유효 폭	1500-2400 mm clear working width
최대 길이	Up to 2600 mm overall bench width
강철 면면 두께	1. 0 - 1. 2 mm 외부 강철; 1. 2 - 1. 5 mm SUS 304 작업대
코어 밀도	80 - 120 kg / m 3 미네랄 울 음향 충전
열전도도 (Thermal Conductivity)	0.035-0.045 W/(m·K) for the mineral-wool infill
표면 마무리	White powder-coated enclosure with brushed continuous SUS304 work surface
접합 유형	Reinforced sealed cabinet seams with a full-width filter clamp and continuous worktop support
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Two independent utility panelsMotorized full-width sashDual blower monitoringSit-stand base configuration

Planning a Dual-Operator Laminar Flow Clean Bench specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.