Wide dual-operator laminar flow clean bench shown in three-quarter view

層流 · 封じ込め装置

デュアルオペレータラミナールフロークリーンベンチ

A wide clean bench with a continuous filtered work area that gives two operators independent reach zones without dividing the protected surface.

Two Independent Reach Zones
Continuous Clean Worktop
Wide Uniform Air Supply
Split Utility Access

見積もりリクエスト製品案内

商品紹介

The dual-operator bench extends the filter, diffuser and worktop across two working positions. Each operator receives a dedicated lighting and utility area while the continuous stainless surface supports shared trays or long assemblies. Internal fan balancing keeps the air supply even across the wider span, and a stiffened front beam limits deflection above the opening. The design is for non-hazardous product-protection work requiring coordinated two-person handling.

主要な特徴

A full-width diffuser avoids a weak central zone between the two operator positions.

Separate utility panels reduce hose and cable crossing over shared work.

The continuous stainless worktop supports long assemblies and coordinated transfers.

Dual lighting sections reduce shadows created by two operators working side by side.

A reinforced front beam maintains sash alignment across the wider cabinet opening.

お客様の製品に関する懸念事項

A two-person clean bench must preserve uniform airflow across a wide opening while separating utilities and operator movements.

Air velocity drops at the center of a wide work zone.Balanced fan branches and a continuous diffuser distribute supply across both positions.

Cables from two operators cross the shared process area.Left and right service panels keep utilities within each operator's reach zone.

A jointed worktop interrupts long assemblies.A continuous reinforced stainless surface spans the dual working width.

The long sash rail can sag and bind.A stiffened front structure supports accurate sash travel across the full opening.

典型的な用途

Large medical-device assemblyTwo-person sterile set preparationLong optical component handlingCollaborative electronics inspection

技術的なパラメータ

Typical configurable construction ranges for a dual-operator laminar flow clean bench are listed below.

コア材料	SUS304 continuous work surface with reinforced powder-coated steel enclosure and mineral-wool acoustic infill
パネルの厚さ	30-50 mm reinforced double-skin sections
有効幅	1500-2400 mm clear working width
最大長さ	Up to 2600 mm overall bench width
鋼鉄の厚さを直面する	1.0 — 1.2 mm の外側の鋼鉄； 1.2 — 1.5 mm の SUS304 ワークトップ
コア密度	80 — 120 kg / m3 ミネラルウール音響インフィル
熱伝導率	0.035-0.045 W/(m·K) for the mineral-wool infill
表面仕上げ	White powder-coated enclosure with brushed continuous SUS304 work surface
ジョイントタイプ	Reinforced sealed cabinet seams with a full-width filter clamp and continuous worktop support
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Two independent utility panelsMotorized full-width sashDual blower monitoringSit-stand base configuration

Planning a Dual-Operator Laminar Flow Clean Bench specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する