Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de flujo laminar y contención
Bench de limpieza de flujo laminar de doble operador
A wide clean bench with a continuous filtered work area that gives two operators independent reach zones without dividing the protected surface.
- Two Independent Reach Zones
- Continuous Clean Worktop
- Wide Uniform Air Supply
- Split Utility Access
Introducción del producto
The dual-operator bench extends the filter, diffuser and worktop across two working positions. Each operator receives a dedicated lighting and utility area while the continuous stainless surface supports shared trays or long assemblies. Internal fan balancing keeps the air supply even across the wider span, and a stiffened front beam limits deflection above the opening. The design is for non-hazardous product-protection work requiring coordinated two-person handling.
Características clave
Separate utility panels reduce hose and cable crossing over shared work.
The continuous stainless worktop supports long assemblies and coordinated transfers.
Dual lighting sections reduce shadows created by two operators working side by side.
A reinforced front beam maintains sash alignment across the wider cabinet opening.
Preocupaciones del producto del cliente
A two-person clean bench must preserve uniform airflow across a wide opening while separating utilities and operator movements.
Air velocity drops at the center of a wide work zone.Balanced fan branches and a continuous diffuser distribute supply across both positions.
Cables from two operators cross the shared process area.Left and right service panels keep utilities within each operator's reach zone.
A jointed worktop interrupts long assemblies.A continuous reinforced stainless surface spans the dual working width.
The long sash rail can sag and bind.A stiffened front structure supports accurate sash travel across the full opening.
Aplicaciones típicas
Large medical-device assemblyTwo-person sterile set preparationLong optical component handlingCollaborative electronics inspection
Parámetros técnicos
Typical configurable construction ranges for a dual-operator laminar flow clean bench are listed below.
| Materiales Core | SUS304 continuous work surface with reinforced powder-coated steel enclosure and mineral-wool acoustic infill |
|---|---|
| Panel de espesor | 30-50 mm reinforced double-skin sections |
| Ancho efectivo | 1500-2400 mm clear working width |
| Longitud máxima | Up to 2600 mm overall bench width |
| Acero frente a espesor | Acero exterior de 1,0 - 1,2 mm; mesa de trabajo de 1,2 - 1,5 mm SUS304 |
| Densidad Core | 80 - 120 kg / m3 relleno acústico de lana mineral por |
| Conductividad térmica | 0.035-0.045 W/(m·K) for the mineral-wool infill |
| Superficie acabada | White powder-coated enclosure with brushed continuous SUS304 work surface |
| Tipo conjunto | Reinforced sealed cabinet seams with a full-width filter clamp and continuous worktop support |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Two independent utility panelsMotorized full-width sashDual blower monitoringSit-stand base configuration
Planning a Dual-Operator Laminar Flow Clean Bench specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
