Equipamentos de drenagem, higiene e segurança da sala limpa

Detector de calor de sala limpa

A sealed low-profile thermal detector for spaces where aerosols or process conditions make optical smoke sensing unsuitable.

Fixed-Temperature or Rate-of-Rise
Low-Profile Cleanable Housing
Addressable Status Reporting
Sealed Ceiling Base

Solicite um orçamento. Browse produtos

Introdução do produto

The cleanroom heat detector monitors ambient temperature with fixed-threshold, rate-of-rise or combined logic. Its smooth polymer head attaches to a gasketed wired base so the visible ceiling interface remains compact. Addressable variants identify the device and report alarm or fault status, while conventional variants connect to zone circuits using the same serviceable head-and-base arrangement.

Características-chave

Selectable thermal logic suits steady or rapidly changing room conditions.

Smooth housing minimizes exposed recesses.

Twist-lock removal leaves wiring secured in the base.

Local LED and remote-indicator terminals simplify status checks.

Preocupações do produto do cliente

Some controlled spaces produce vapor or aerosols that can cause unwanted optical alarms but still require dependable fire detection.

Routine aerosols resemble smoke to an optical chamber.Thermal sensing responds to temperature behavior instead of airborne particles.

A high normal temperature can sit close to a generic alarm point.The detector class and threshold are selected for the actual ambient range.

Ceiling wiring should not be disturbed during head replacement.A removable sensing head connects to a permanently wired base.

Maintenance staff need quick alarm location.Device addressing and visible LED status identify the active detector.

Aplicações típicas

Clean utility roomsProcess support spacesAreas with routine aerosolsControlled electrical rooms

Parâmetros técnicos

Typical housing and mounting values are listed below; thermal class and system compatibility are selected for the protected space.

Material principal	Flame-retardant polymer housing with stainless mounting plate and electronic thermistor
Painel de espessura	2.0-3.0 mm molded housing wall
Largura efetiva	90-130 mm detector diameter
Comprimento máximo	Up to 70 mm installed depth
Aço enfrentando espessura	0.8-1.2 mm internal stainless mounting plate
Densidade Core	1200-1450 kg/m³ for polymer housing
Condutividade térmica	0.18-0.30 W/(m·K) for polymer housing
Superfície acabado	Smooth matte white cleanable housing
Tipo conjunto	Twist-lock thermal head on gasketed wired mounting base
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Fixed-temperature classRate-of-rise logicAddressable isolator baseRemote indicator

Planning a Cleanroom Heat Detector specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe