Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum Drainage, Hygiene und Sicherheitsgeräte
Reinraum-Wärme - Detektor
A sealed low-profile thermal detector for spaces where aerosols or process conditions make optical smoke sensing unsuitable.
- Fixed-Temperature or Rate-of-Rise
- Low-Profile Cleanable Housing
- Addressable Status Reporting
- Sealed Ceiling Base
Produkteinführung
The cleanroom heat detector monitors ambient temperature with fixed-threshold, rate-of-rise or combined logic. Its smooth polymer head attaches to a gasketed wired base so the visible ceiling interface remains compact. Addressable variants identify the device and report alarm or fault status, while conventional variants connect to zone circuits using the same serviceable head-and-base arrangement.
Key Features
Smooth housing minimizes exposed recesses.
Twist-lock removal leaves wiring secured in the base.
Local LED and remote-indicator terminals simplify status checks.
Kunden Produktbedenken
Some controlled spaces produce vapor or aerosols that can cause unwanted optical alarms but still require dependable fire detection.
Routine aerosols resemble smoke to an optical chamber.Thermal sensing responds to temperature behavior instead of airborne particles.
A high normal temperature can sit close to a generic alarm point.The detector class and threshold are selected for the actual ambient range.
Ceiling wiring should not be disturbed during head replacement.A removable sensing head connects to a permanently wired base.
Maintenance staff need quick alarm location.Device addressing and visible LED status identify the active detector.
Typische Anwendungen
Clean utility roomsProcess support spacesAreas with routine aerosolsControlled electrical rooms
Technische Parameter
Typical housing and mounting values are listed below; thermal class and system compatibility are selected for the protected space.
| Core Material | Flame-retardant polymer housing with stainless mounting plate and electronic thermistor |
|---|---|
| Panel Dicke | 2.0-3.0 mm molded housing wall |
| Effektive Breite | 90-130 mm detector diameter |
| Maximale Länge | Up to 70 mm installed depth |
| Stahl facing Dicke | 0.8-1.2 mm internal stainless mounting plate |
| Kerndichte | 1200-1450 kg/m³ for polymer housing |
| Thermische Leitfähigkeit | 0.18-0.30 W/(m·K) for polymer housing |
| Oberfläche Finish | Smooth matte white cleanable housing |
| Gemeinsamer Typ | Twist-lock thermal head on gasketed wired mounting base |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Fixed-temperature classRate-of-rise logicAddressable isolator baseRemote indicator
Planning a Cleanroom Heat Detector specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
