English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Дренажное оборудование, оборудование для гигиены и безопасности в чистых помещениях
Тепловой детектор в чистой комнате
A sealed low-profile thermal detector for spaces where aerosols or process conditions make optical smoke sensing unsuitable.
- Fixed-Temperature or Rate-of-Rise
- Low-Profile Cleanable Housing
- Addressable Status Reporting
- Sealed Ceiling Base
Введение продукции
The cleanroom heat detector monitors ambient temperature with fixed-threshold, rate-of-rise or combined logic. Its smooth polymer head attaches to a gasketed wired base so the visible ceiling interface remains compact. Addressable variants identify the device and report alarm or fault status, while conventional variants connect to zone circuits using the same serviceable head-and-base arrangement.
Основные характеристики
Smooth housing minimizes exposed recesses.
Twist-lock removal leaves wiring secured in the base.
Local LED and remote-indicator terminals simplify status checks.
Обеспокоенность клиентов продуктами
Some controlled spaces produce vapor or aerosols that can cause unwanted optical alarms but still require dependable fire detection.
Routine aerosols resemble smoke to an optical chamber.Thermal sensing responds to temperature behavior instead of airborne particles.
A high normal temperature can sit close to a generic alarm point.The detector class and threshold are selected for the actual ambient range.
Ceiling wiring should not be disturbed during head replacement.A removable sensing head connects to a permanently wired base.
Maintenance staff need quick alarm location.Device addressing and visible LED status identify the active detector.
Типичные приложения
Clean utility roomsProcess support spacesAreas with routine aerosolsControlled electrical rooms
Технические параметры
Typical housing and mounting values are listed below; thermal class and system compatibility are selected for the protected space.
| Основной материал | Flame-retardant polymer housing with stainless mounting plate and electronic thermistor |
|---|---|
| Толщина панели | 2.0-3.0 mm molded housing wall |
| эффективная ширина | 90-130 mm detector diameter |
| Максимальная длина | Up to 70 mm installed depth |
| Толщина линий стали | 0.8-1.2 mm internal stainless mounting plate |
| Плотность ядра | 1200-1450 kg/m³ for polymer housing |
| Теплопроводимость | 0.18-0.30 W/(m·K) for polymer housing |
| Поверхностная отделка | Smooth matte white cleanable housing |
| Объединенный тип | Twist-lock thermal head on gasketed wired mounting base |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Fixed-temperature classRate-of-rise logicAddressable isolator baseRemote indicator
Planning a Cleanroom Heat Detector specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
