クリーンルーム排水 · 衛生 · 安全設備

クリーンルーム熱検出器

A sealed low-profile thermal detector for spaces where aerosols or process conditions make optical smoke sensing unsuitable.

Fixed-Temperature or Rate-of-Rise
Low-Profile Cleanable Housing
Addressable Status Reporting
Sealed Ceiling Base

見積もりリクエスト製品案内

商品紹介

The cleanroom heat detector monitors ambient temperature with fixed-threshold, rate-of-rise or combined logic. Its smooth polymer head attaches to a gasketed wired base so the visible ceiling interface remains compact. Addressable variants identify the device and report alarm or fault status, while conventional variants connect to zone circuits using the same serviceable head-and-base arrangement.

主要な特徴

Selectable thermal logic suits steady or rapidly changing room conditions.

Smooth housing minimizes exposed recesses.

Twist-lock removal leaves wiring secured in the base.

Local LED and remote-indicator terminals simplify status checks.

お客様の製品に関する懸念事項

Some controlled spaces produce vapor or aerosols that can cause unwanted optical alarms but still require dependable fire detection.

Routine aerosols resemble smoke to an optical chamber.Thermal sensing responds to temperature behavior instead of airborne particles.

A high normal temperature can sit close to a generic alarm point.The detector class and threshold are selected for the actual ambient range.

Ceiling wiring should not be disturbed during head replacement.A removable sensing head connects to a permanently wired base.

Maintenance staff need quick alarm location.Device addressing and visible LED status identify the active detector.

典型的な用途

Clean utility roomsProcess support spacesAreas with routine aerosolsControlled electrical rooms

技術的なパラメータ

Typical housing and mounting values are listed below; thermal class and system compatibility are selected for the protected space.

コア材料	Flame-retardant polymer housing with stainless mounting plate and electronic thermistor
パネルの厚さ	2.0-3.0 mm molded housing wall
有効幅	90-130 mm detector diameter
最大長さ	Up to 70 mm installed depth
鋼鉄の厚さを直面する	0.8-1.2 mm internal stainless mounting plate
コア密度	1200-1450 kg/m³ for polymer housing
熱伝導率	0.18-0.30 W/(m·K) for polymer housing
表面仕上げ	Smooth matte white cleanable housing
ジョイントタイプ	Twist-lock thermal head on gasketed wired mounting base
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Fixed-temperature classRate-of-rise logicAddressable isolator baseRemote indicator

Planning a Cleanroom Heat Detector specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する