Temiz Oda Drenajı, Hijyen ve Güvenlik Ekipmanları

Temiz Oda Sıcaklık Detektörü

A sealed low-profile thermal detector for spaces where aerosols or process conditions make optical smoke sensing unsuitable.

Fixed-Temperature or Rate-of-Rise
Low-Profile Cleanable Housing
Addressable Status Reporting
Sealed Ceiling Base

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The cleanroom heat detector monitors ambient temperature with fixed-threshold, rate-of-rise or combined logic. Its smooth polymer head attaches to a gasketed wired base so the visible ceiling interface remains compact. Addressable variants identify the device and report alarm or fault status, while conventional variants connect to zone circuits using the same serviceable head-and-base arrangement.

Ana Özellikler

Selectable thermal logic suits steady or rapidly changing room conditions.

Smooth housing minimizes exposed recesses.

Twist-lock removal leaves wiring secured in the base.

Local LED and remote-indicator terminals simplify status checks.

Müşteri Ürün Sorunları

Some controlled spaces produce vapor or aerosols that can cause unwanted optical alarms but still require dependable fire detection.

Routine aerosols resemble smoke to an optical chamber.Thermal sensing responds to temperature behavior instead of airborne particles.

A high normal temperature can sit close to a generic alarm point.The detector class and threshold are selected for the actual ambient range.

Ceiling wiring should not be disturbed during head replacement.A removable sensing head connects to a permanently wired base.

Maintenance staff need quick alarm location.Device addressing and visible LED status identify the active detector.

Tipik uygulamalar

Clean utility roomsProcess support spacesAreas with routine aerosolsControlled electrical rooms

Teknik parametreler

Typical housing and mounting values are listed below; thermal class and system compatibility are selected for the protected space.

Temel malzemeler	Flame-retardant polymer housing with stainless mounting plate and electronic thermistor
Panel kalınlığı	2.0-3.0 mm molded housing wall
Effective Width (Etkili Genişlik)	90-130 mm detector diameter
Maksimum uzunluk	Up to 70 mm installed depth
Çelik yüz yüze kalınlığı	0.8-1.2 mm internal stainless mounting plate
Core Density (Çekirdek Yoğunluğu)	1200-1450 kg/m³ for polymer housing
Termal İletkenlik	0.18-0.30 W/(m·K) for polymer housing
Yüzey bitirme	Smooth matte white cleanable housing
Ortak tip	Twist-lock thermal head on gasketed wired mounting base
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Fixed-temperature classRate-of-rise logicAddressable isolator baseRemote indicator

Planning a Cleanroom Heat Detector specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun