Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Drenaje de sala limpia, equipos de higiene y seguridad
Detector de calor de sala limpia
A sealed low-profile thermal detector for spaces where aerosols or process conditions make optical smoke sensing unsuitable.
- Fixed-Temperature or Rate-of-Rise
- Low-Profile Cleanable Housing
- Addressable Status Reporting
- Sealed Ceiling Base
Introducción del producto
The cleanroom heat detector monitors ambient temperature with fixed-threshold, rate-of-rise or combined logic. Its smooth polymer head attaches to a gasketed wired base so the visible ceiling interface remains compact. Addressable variants identify the device and report alarm or fault status, while conventional variants connect to zone circuits using the same serviceable head-and-base arrangement.
Características clave
Smooth housing minimizes exposed recesses.
Twist-lock removal leaves wiring secured in the base.
Local LED and remote-indicator terminals simplify status checks.
Preocupaciones del producto del cliente
Some controlled spaces produce vapor or aerosols that can cause unwanted optical alarms but still require dependable fire detection.
Routine aerosols resemble smoke to an optical chamber.Thermal sensing responds to temperature behavior instead of airborne particles.
A high normal temperature can sit close to a generic alarm point.The detector class and threshold are selected for the actual ambient range.
Ceiling wiring should not be disturbed during head replacement.A removable sensing head connects to a permanently wired base.
Maintenance staff need quick alarm location.Device addressing and visible LED status identify the active detector.
Aplicaciones típicas
Clean utility roomsProcess support spacesAreas with routine aerosolsControlled electrical rooms
Parámetros técnicos
Typical housing and mounting values are listed below; thermal class and system compatibility are selected for the protected space.
| Materiales Core | Flame-retardant polymer housing with stainless mounting plate and electronic thermistor |
|---|---|
| Panel de espesor | 2.0-3.0 mm molded housing wall |
| Ancho efectivo | 90-130 mm detector diameter |
| Longitud máxima | Up to 70 mm installed depth |
| Acero frente a espesor | 0.8-1.2 mm internal stainless mounting plate |
| Densidad Core | 1200-1450 kg/m³ for polymer housing |
| Conductividad térmica | 0.18-0.30 W/(m·K) for polymer housing |
| Superficie acabada | Smooth matte white cleanable housing |
| Tipo conjunto | Twist-lock thermal head on gasketed wired mounting base |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Fixed-temperature classRate-of-rise logicAddressable isolator baseRemote indicator
Planning a Cleanroom Heat Detector specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
