Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Portas de sala limpa, janelas e sistemas de bloqueio
Cleanroom Elétrico Drop Bolt Lock
A concealed solenoid-operated bolt that projects into a matching keeper after the cleanroom door reaches its aligned closed position.
- Concealed Mortise Body
- Hardened Stainless Bolt
- Door Alignment Tolerance
- Bolt Status Feedback
Introdução do produto
This electric drop bolt is recessed into the cleanroom header, frame or door leaf so only narrow stainless faceplates remain visible. A position input prevents premature projection, then the solenoid drives a hardened bolt into the keeper to secure the closed opening. Monitored versions can report both door alignment and bolt position, making the lock suitable for automated access sequences where a compact hidden mechanism is preferred.
Características-chave
The narrow mortise body fits aluminum cleanroom frames without a bulky external lock case.
Door-position and bolt-position contacts support separate closed and locked indications.
A controlled re-lock delay can accommodate door rebound before the bolt projects.
Preocupações do produto do cliente
A concealed bolt must tolerate normal door movement while avoiding projection against a misaligned keeper.
A bolt that fires before the leaf settles can strike the keeper edge and jam.The lock uses door-position input and an adjustable delay before extension.
External lock cases disrupt the clean lines of a narrow aluminum frame.The solenoid body is mortised behind a slim stainless faceplate.
Maintenance staff need to know whether the bolt actually reached the locked position.A dedicated bolt monitor reports full extension independently of the door contact.
Aplicações típicas
Interlocked swing doorsAutomatic sliding cleanroom doorsRestricted laboratory roomsHigh-value controlled storage
Parâmetros técnicos
Common dimensions and materials for a compact cleanroom electric drop bolt are shown below.
| Material principal | Copper solenoid coil, low-carbon steel plunger and hardened stainless-steel bolt |
|---|---|
| Painel de espessura | Approximately 43–46 mm mortise-body depth |
| Largura efetiva | Approximately 34–38 mm faceplate width |
| Comprimento máximo | Approximately 210 mm overall faceplate length |
| Aço enfrentando espessura | 2.5–3.0 mm brushed stainless-steel faceplate |
| Densidade Core | Approximately 7850 kg/m³ for the steel bolt and magnetic plunger |
| Condutividade térmica | Approximately 15–50 W/(m·K) across stainless and low-carbon steel components |
| Superfície acabado | Brushed stainless-steel lock and keeper faceplates |
| Tipo conjunto | Flush mortise installation with aligned bolt keeper and concealed cable entry |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Fail-safe or fail-secure operation12 or 24 VDC inputBolt and door-position monitoringNarrow-frame and glass-door brackets
Planning a Cleanroom Electric Drop Bolt Lock specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
