Electric drop bolt lock with stainless keeper for a cleanroom door

クリーンルームのドア、窓およびインターロックシステム

クリーンルーム電気ドロップボルトロック

A concealed solenoid-operated bolt that projects into a matching keeper after the cleanroom door reaches its aligned closed position.

Concealed Mortise Body
Hardened Stainless Bolt
Door Alignment Tolerance
Bolt Status Feedback

見積もりリクエスト製品案内

商品紹介

This electric drop bolt is recessed into the cleanroom header, frame or door leaf so only narrow stainless faceplates remain visible. A position input prevents premature projection, then the solenoid drives a hardened bolt into the keeper to secure the closed opening. Monitored versions can report both door alignment and bolt position, making the lock suitable for automated access sequences where a compact hidden mechanism is preferred.

主要な特徴

A stainless bolt and reinforced keeper provide positive mechanical engagement after the door closes.

The narrow mortise body fits aluminum cleanroom frames without a bulky external lock case.

Door-position and bolt-position contacts support separate closed and locked indications.

A controlled re-lock delay can accommodate door rebound before the bolt projects.

お客様の製品に関する懸念事項

A concealed bolt must tolerate normal door movement while avoiding projection against a misaligned keeper.

A bolt that fires before the leaf settles can strike the keeper edge and jam.The lock uses door-position input and an adjustable delay before extension.

External lock cases disrupt the clean lines of a narrow aluminum frame.The solenoid body is mortised behind a slim stainless faceplate.

Maintenance staff need to know whether the bolt actually reached the locked position.A dedicated bolt monitor reports full extension independently of the door contact.

典型的な用途

Interlocked swing doorsAutomatic sliding cleanroom doorsRestricted laboratory roomsHigh-value controlled storage

技術的なパラメータ

Common dimensions and materials for a compact cleanroom electric drop bolt are shown below.

コア材料	Copper solenoid coil, low-carbon steel plunger and hardened stainless-steel bolt
パネルの厚さ	Approximately 43–46 mm mortise-body depth
有効幅	Approximately 34–38 mm faceplate width
最大長さ	Approximately 210 mm overall faceplate length
鋼鉄の厚さを直面する	2.5–3.0 mm brushed stainless-steel faceplate
コア密度	Approximately 7850 kg/m³ for the steel bolt and magnetic plunger
熱伝導率	Approximately 15–50 W/(m·K) across stainless and low-carbon steel components
表面仕上げ	Brushed stainless-steel lock and keeper faceplates
ジョイントタイプ	Flush mortise installation with aligned bolt keeper and concealed cable entry
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Fail-safe or fail-secure operation12 or 24 VDC inputBolt and door-position monitoringNarrow-frame and glass-door brackets

Planning a Cleanroom Electric Drop Bolt Lock specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する