Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Puertas de sala limpia, ventanas y sistemas de bloqueo
Sala limpia eléctrica Drop Bolt Lock
A concealed solenoid-operated bolt that projects into a matching keeper after the cleanroom door reaches its aligned closed position.
- Concealed Mortise Body
- Hardened Stainless Bolt
- Door Alignment Tolerance
- Bolt Status Feedback
Introducción del producto
This electric drop bolt is recessed into the cleanroom header, frame or door leaf so only narrow stainless faceplates remain visible. A position input prevents premature projection, then the solenoid drives a hardened bolt into the keeper to secure the closed opening. Monitored versions can report both door alignment and bolt position, making the lock suitable for automated access sequences where a compact hidden mechanism is preferred.
Características clave
The narrow mortise body fits aluminum cleanroom frames without a bulky external lock case.
Door-position and bolt-position contacts support separate closed and locked indications.
A controlled re-lock delay can accommodate door rebound before the bolt projects.
Preocupaciones del producto del cliente
A concealed bolt must tolerate normal door movement while avoiding projection against a misaligned keeper.
A bolt that fires before the leaf settles can strike the keeper edge and jam.The lock uses door-position input and an adjustable delay before extension.
External lock cases disrupt the clean lines of a narrow aluminum frame.The solenoid body is mortised behind a slim stainless faceplate.
Maintenance staff need to know whether the bolt actually reached the locked position.A dedicated bolt monitor reports full extension independently of the door contact.
Aplicaciones típicas
Interlocked swing doorsAutomatic sliding cleanroom doorsRestricted laboratory roomsHigh-value controlled storage
Parámetros técnicos
Common dimensions and materials for a compact cleanroom electric drop bolt are shown below.
| Materiales Core | Copper solenoid coil, low-carbon steel plunger and hardened stainless-steel bolt |
|---|---|
| Panel de espesor | Approximately 43–46 mm mortise-body depth |
| Ancho efectivo | Approximately 34–38 mm faceplate width |
| Longitud máxima | Approximately 210 mm overall faceplate length |
| Acero frente a espesor | 2.5–3.0 mm brushed stainless-steel faceplate |
| Densidad Core | Approximately 7850 kg/m³ for the steel bolt and magnetic plunger |
| Conductividad térmica | Approximately 15–50 W/(m·K) across stainless and low-carbon steel components |
| Superficie acabada | Brushed stainless-steel lock and keeper faceplates |
| Tipo conjunto | Flush mortise installation with aligned bolt keeper and concealed cable entry |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Fail-safe or fail-secure operation12 or 24 VDC inputBolt and door-position monitoringNarrow-frame and glass-door brackets
Planning a Cleanroom Electric Drop Bolt Lock specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
