English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Двери в чистых помещениях, окна и системы блокировки
Cleanroom Electric Drop Bolt Lock
A concealed solenoid-operated bolt that projects into a matching keeper after the cleanroom door reaches its aligned closed position.
- Concealed Mortise Body
- Hardened Stainless Bolt
- Door Alignment Tolerance
- Bolt Status Feedback
Введение продукции
This electric drop bolt is recessed into the cleanroom header, frame or door leaf so only narrow stainless faceplates remain visible. A position input prevents premature projection, then the solenoid drives a hardened bolt into the keeper to secure the closed opening. Monitored versions can report both door alignment and bolt position, making the lock suitable for automated access sequences where a compact hidden mechanism is preferred.
Основные характеристики
The narrow mortise body fits aluminum cleanroom frames without a bulky external lock case.
Door-position and bolt-position contacts support separate closed and locked indications.
A controlled re-lock delay can accommodate door rebound before the bolt projects.
Обеспокоенность клиентов продуктами
A concealed bolt must tolerate normal door movement while avoiding projection against a misaligned keeper.
A bolt that fires before the leaf settles can strike the keeper edge and jam.The lock uses door-position input and an adjustable delay before extension.
External lock cases disrupt the clean lines of a narrow aluminum frame.The solenoid body is mortised behind a slim stainless faceplate.
Maintenance staff need to know whether the bolt actually reached the locked position.A dedicated bolt monitor reports full extension independently of the door contact.
Типичные приложения
Interlocked swing doorsAutomatic sliding cleanroom doorsRestricted laboratory roomsHigh-value controlled storage
Технические параметры
Common dimensions and materials for a compact cleanroom electric drop bolt are shown below.
| Основной материал | Copper solenoid coil, low-carbon steel plunger and hardened stainless-steel bolt |
|---|---|
| Толщина панели | Approximately 43–46 mm mortise-body depth |
| эффективная ширина | Approximately 34–38 mm faceplate width |
| Максимальная длина | Approximately 210 mm overall faceplate length |
| Толщина линий стали | 2.5–3.0 mm brushed stainless-steel faceplate |
| Плотность ядра | Approximately 7850 kg/m³ for the steel bolt and magnetic plunger |
| Теплопроводимость | Approximately 15–50 W/(m·K) across stainless and low-carbon steel components |
| Поверхностная отделка | Brushed stainless-steel lock and keeper faceplates |
| Объединенный тип | Flush mortise installation with aligned bolt keeper and concealed cable entry |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Fail-safe or fail-secure operation12 or 24 VDC inputBolt and door-position monitoringNarrow-frame and glass-door brackets
Planning a Cleanroom Electric Drop Bolt Lock specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
