English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أبواب الغرف النظيفة ونوافذ وأنظمة التشابك
غرفة نظيفة انخفاض الكهربائية ترباس قفل
A concealed solenoid-operated bolt that projects into a matching keeper after the cleanroom door reaches its aligned closed position.
- Concealed Mortise Body
- Hardened Stainless Bolt
- Door Alignment Tolerance
- Bolt Status Feedback
مقدمة المنتج
This electric drop bolt is recessed into the cleanroom header, frame or door leaf so only narrow stainless faceplates remain visible. A position input prevents premature projection, then the solenoid drives a hardened bolt into the keeper to secure the closed opening. Monitored versions can report both door alignment and bolt position, making the lock suitable for automated access sequences where a compact hidden mechanism is preferred.
الخصائص الرئيسية
The narrow mortise body fits aluminum cleanroom frames without a bulky external lock case.
Door-position and bolt-position contacts support separate closed and locked indications.
A controlled re-lock delay can accommodate door rebound before the bolt projects.
مخاوف المنتج للعملاء
A concealed bolt must tolerate normal door movement while avoiding projection against a misaligned keeper.
A bolt that fires before the leaf settles can strike the keeper edge and jam.The lock uses door-position input and an adjustable delay before extension.
External lock cases disrupt the clean lines of a narrow aluminum frame.The solenoid body is mortised behind a slim stainless faceplate.
Maintenance staff need to know whether the bolt actually reached the locked position.A dedicated bolt monitor reports full extension independently of the door contact.
تطبيقات نموذجية
Interlocked swing doorsAutomatic sliding cleanroom doorsRestricted laboratory roomsHigh-value controlled storage
المعلمات الفنية
Common dimensions and materials for a compact cleanroom electric drop bolt are shown below.
| المواد الأساسية | Copper solenoid coil, low-carbon steel plunger and hardened stainless-steel bolt |
|---|---|
| سمك اللوحة | Approximately 43–46 mm mortise-body depth |
| العرض الفعال | Approximately 34–38 mm faceplate width |
| الحد الأقصى الطول | Approximately 210 mm overall faceplate length |
| الصلب يواجه سمك | 2.5–3.0 mm brushed stainless-steel faceplate |
| الكثافة الأساسية | Approximately 7850 kg/m³ for the steel bolt and magnetic plunger |
| الموصلية الحرارية | Approximately 15–50 W/(m·K) across stainless and low-carbon steel components |
| إنهاء السطح | Brushed stainless-steel lock and keeper faceplates |
| نوع المشترك | Flush mortise installation with aligned bolt keeper and concealed cable entry |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Fail-safe or fail-secure operation12 or 24 VDC inputBolt and door-position monitoringNarrow-frame and glass-door brackets
Planning a Cleanroom Electric Drop Bolt Lock specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
