İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kapıları, Pencereler ve Kilitleme Sistemleri
Temiz Oda Elektrikli Drop Bolt Lock
A concealed solenoid-operated bolt that projects into a matching keeper after the cleanroom door reaches its aligned closed position.
- Concealed Mortise Body
- Hardened Stainless Bolt
- Door Alignment Tolerance
- Bolt Status Feedback
Ürün tanıtımı
This electric drop bolt is recessed into the cleanroom header, frame or door leaf so only narrow stainless faceplates remain visible. A position input prevents premature projection, then the solenoid drives a hardened bolt into the keeper to secure the closed opening. Monitored versions can report both door alignment and bolt position, making the lock suitable for automated access sequences where a compact hidden mechanism is preferred.
Ana Özellikler
The narrow mortise body fits aluminum cleanroom frames without a bulky external lock case.
Door-position and bolt-position contacts support separate closed and locked indications.
A controlled re-lock delay can accommodate door rebound before the bolt projects.
Müşteri Ürün Sorunları
A concealed bolt must tolerate normal door movement while avoiding projection against a misaligned keeper.
A bolt that fires before the leaf settles can strike the keeper edge and jam.The lock uses door-position input and an adjustable delay before extension.
External lock cases disrupt the clean lines of a narrow aluminum frame.The solenoid body is mortised behind a slim stainless faceplate.
Maintenance staff need to know whether the bolt actually reached the locked position.A dedicated bolt monitor reports full extension independently of the door contact.
Tipik uygulamalar
Interlocked swing doorsAutomatic sliding cleanroom doorsRestricted laboratory roomsHigh-value controlled storage
Teknik parametreler
Common dimensions and materials for a compact cleanroom electric drop bolt are shown below.
| Temel malzemeler | Copper solenoid coil, low-carbon steel plunger and hardened stainless-steel bolt |
|---|---|
| Panel kalınlığı | Approximately 43–46 mm mortise-body depth |
| Effective Width (Etkili Genişlik) | Approximately 34–38 mm faceplate width |
| Maksimum uzunluk | Approximately 210 mm overall faceplate length |
| Çelik yüz yüze kalınlığı | 2.5–3.0 mm brushed stainless-steel faceplate |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7850 kg/m³ for the steel bolt and magnetic plunger |
| Termal İletkenlik | Approximately 15–50 W/(m·K) across stainless and low-carbon steel components |
| Yüzey bitirme | Brushed stainless-steel lock and keeper faceplates |
| Ortak tip | Flush mortise installation with aligned bolt keeper and concealed cable entry |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Fail-safe or fail-secure operation12 or 24 VDC inputBolt and door-position monitoringNarrow-frame and glass-door brackets
Planning a Cleanroom Electric Drop Bolt Lock specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
