Electric drop bolt lock with stainless keeper for a cleanroom door

Pintu Bilik Bersih, Windows dan Sistem Interlock

Bilik Bersih Elektrik Drop Bolt Lock

A concealed solenoid-operated bolt that projects into a matching keeper after the cleanroom door reaches its aligned closed position.

Concealed Mortise Body
Hardened Stainless Bolt
Door Alignment Tolerance
Bolt Status Feedback

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This electric drop bolt is recessed into the cleanroom header, frame or door leaf so only narrow stainless faceplates remain visible. A position input prevents premature projection, then the solenoid drives a hardened bolt into the keeper to secure the closed opening. Monitored versions can report both door alignment and bolt position, making the lock suitable for automated access sequences where a compact hidden mechanism is preferred.

Ciri-ciri Utama

A stainless bolt and reinforced keeper provide positive mechanical engagement after the door closes.

The narrow mortise body fits aluminum cleanroom frames without a bulky external lock case.

Door-position and bolt-position contacts support separate closed and locked indications.

A controlled re-lock delay can accommodate door rebound before the bolt projects.

Kebimbangan Produk Pelanggan

A concealed bolt must tolerate normal door movement while avoiding projection against a misaligned keeper.

A bolt that fires before the leaf settles can strike the keeper edge and jam.The lock uses door-position input and an adjustable delay before extension.

External lock cases disrupt the clean lines of a narrow aluminum frame.The solenoid body is mortised behind a slim stainless faceplate.

Maintenance staff need to know whether the bolt actually reached the locked position.A dedicated bolt monitor reports full extension independently of the door contact.

Permohonan yang biasa

Interlocked swing doorsAutomatic sliding cleanroom doorsRestricted laboratory roomsHigh-value controlled storage

Parameter teknikal

Common dimensions and materials for a compact cleanroom electric drop bolt are shown below.

Bahan Teras	Copper solenoid coil, low-carbon steel plunger and hardened stainless-steel bolt
Ketebalan Panel	Approximately 43–46 mm mortise-body depth
Lebar berkesan	Approximately 34–38 mm faceplate width
Panjang maksimum	Approximately 210 mm overall faceplate length
Keluli Menghadapi Ketebalan	2.5–3.0 mm brushed stainless-steel faceplate
Ketumpatan teras	Approximately 7850 kg/m³ for the steel bolt and magnetic plunger
Kekonduksian Terma	Approximately 15–50 W/(m·K) across stainless and low-carbon steel components
Kemasan permukaan	Brushed stainless-steel lock and keeper faceplates
Jenis Bersatu	Flush mortise installation with aligned bolt keeper and concealed cable entry
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Fail-safe or fail-secure operation12 or 24 VDC inputBolt and door-position monitoringNarrow-frame and glass-door brackets

Planning a Cleanroom Electric Drop Bolt Lock specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami