Electric drop bolt lock with stainless keeper for a cleanroom door

클린룸 도어, 창문 및 인터락 시스템

클린룸 전기 드롭 볼트 잠금

A concealed solenoid-operated bolt that projects into a matching keeper after the cleanroom door reaches its aligned closed position.

Concealed Mortise Body
Hardened Stainless Bolt
Door Alignment Tolerance
Bolt Status Feedback

견적 요청 제품 찾아보기

상품 소개

This electric drop bolt is recessed into the cleanroom header, frame or door leaf so only narrow stainless faceplates remain visible. A position input prevents premature projection, then the solenoid drives a hardened bolt into the keeper to secure the closed opening. Monitored versions can report both door alignment and bolt position, making the lock suitable for automated access sequences where a compact hidden mechanism is preferred.

주요 기능

A stainless bolt and reinforced keeper provide positive mechanical engagement after the door closes.

The narrow mortise body fits aluminum cleanroom frames without a bulky external lock case.

Door-position and bolt-position contacts support separate closed and locked indications.

A controlled re-lock delay can accommodate door rebound before the bolt projects.

고객 제품 관심사

A concealed bolt must tolerate normal door movement while avoiding projection against a misaligned keeper.

A bolt that fires before the leaf settles can strike the keeper edge and jam.The lock uses door-position input and an adjustable delay before extension.

External lock cases disrupt the clean lines of a narrow aluminum frame.The solenoid body is mortised behind a slim stainless faceplate.

Maintenance staff need to know whether the bolt actually reached the locked position.A dedicated bolt monitor reports full extension independently of the door contact.

일반적인 응용 프로그램

Interlocked swing doorsAutomatic sliding cleanroom doorsRestricted laboratory roomsHigh-value controlled storage

기술 매개변수

Common dimensions and materials for a compact cleanroom electric drop bolt are shown below.

핵심 재료	Copper solenoid coil, low-carbon steel plunger and hardened stainless-steel bolt
패널 두께	Approximately 43–46 mm mortise-body depth
유효 폭	Approximately 34–38 mm faceplate width
최대 길이	Approximately 210 mm overall faceplate length
강철 면면 두께	2.5–3.0 mm brushed stainless-steel faceplate
코어 밀도	Approximately 7850 kg/m³ for the steel bolt and magnetic plunger
열전도도 (Thermal Conductivity)	Approximately 15–50 W/(m·K) across stainless and low-carbon steel components
표면 마무리	Brushed stainless-steel lock and keeper faceplates
접합 유형	Flush mortise installation with aligned bolt keeper and concealed cable entry
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Fail-safe or fail-secure operation12 or 24 VDC inputBolt and door-position monitoringNarrow-frame and glass-door brackets

Planning a Cleanroom Electric Drop Bolt Lock specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.