Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Pintu Cleanroom, Jendela dan Sistem Interlock
Cleanroom Listrik Drop Bolt Lock
A concealed solenoid-operated bolt that projects into a matching keeper after the cleanroom door reaches its aligned closed position.
- Concealed Mortise Body
- Hardened Stainless Bolt
- Door Alignment Tolerance
- Bolt Status Feedback
Perkenalan produk
This electric drop bolt is recessed into the cleanroom header, frame or door leaf so only narrow stainless faceplates remain visible. A position input prevents premature projection, then the solenoid drives a hardened bolt into the keeper to secure the closed opening. Monitored versions can report both door alignment and bolt position, making the lock suitable for automated access sequences where a compact hidden mechanism is preferred.
Fitur utama:
The narrow mortise body fits aluminum cleanroom frames without a bulky external lock case.
Door-position and bolt-position contacts support separate closed and locked indications.
A controlled re-lock delay can accommodate door rebound before the bolt projects.
Kekhawatiran produk pelanggan
A concealed bolt must tolerate normal door movement while avoiding projection against a misaligned keeper.
A bolt that fires before the leaf settles can strike the keeper edge and jam.The lock uses door-position input and an adjustable delay before extension.
External lock cases disrupt the clean lines of a narrow aluminum frame.The solenoid body is mortised behind a slim stainless faceplate.
Maintenance staff need to know whether the bolt actually reached the locked position.A dedicated bolt monitor reports full extension independently of the door contact.
Aplikasi yang Tipis
Interlocked swing doorsAutomatic sliding cleanroom doorsRestricted laboratory roomsHigh-value controlled storage
Parameter teknis
Common dimensions and materials for a compact cleanroom electric drop bolt are shown below.
| Bahan inti | Copper solenoid coil, low-carbon steel plunger and hardened stainless-steel bolt |
|---|---|
| Ketebalan Panel (Panel Thickness) | Approximately 43–46 mm mortise-body depth |
| Efektif lebar | Approximately 34–38 mm faceplate width |
| Panjang maksimum | Approximately 210 mm overall faceplate length |
| Baja menghadap ketebalan | 2.5–3.0 mm brushed stainless-steel faceplate |
| Kepadatan inti (core density) | Approximately 7850 kg/m³ for the steel bolt and magnetic plunger |
| Konduktivitas Termal (Thermal Conductivity) | Approximately 15–50 W/(m·K) across stainless and low-carbon steel components |
| Permukaan selesai | Brushed stainless-steel lock and keeper faceplates |
| Jenis Bersama | Flush mortise installation with aligned bolt keeper and concealed cable entry |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Fail-safe or fail-secure operation12 or 24 VDC inputBolt and door-position monitoringNarrow-frame and glass-door brackets
Planning a Cleanroom Electric Drop Bolt Lock specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
