Chemical protective-suit decontamination shower with stainless chamber and dosing skid

Equipamento de descontaminação de pessoal e materiais

Duche de descontaminação de proteção química

A protective-suit treatment chamber that doses a compatible solution into a controlled spray cycle followed by a separate rinse.

Metered Solution Dosing
Controlled Contact Time
Separate Rinse Circuit
Chemical-Resistant Wetted Parts

Solicite um orçamento. Browse produtos

Introdução do produto

This decontamination shower combines a covered mixing vessel, dosing pump and circulation manifold for repeatable treatment of the exterior of compatible protective suits. The design separates the treatment circuit from the final water rinse and directs used liquid to a designated drain route. Material selection for seals, pump components and pipework is matched to the selected process chemistry.

Características-chave

A covered tank and dosing pump reduce open handling of treatment liquid.

Recirculation maintains nozzle pressure during the chosen contact period.

Separate treatment and rinse branches reduce unintended chemical carryover.

Instrument ports allow solution level, temperature or concentration monitoring.

Surrounding spray zones reach the front, back, hood and boot surfaces.

Preocupações do produto do cliente

Chemical suit treatment depends on accurate dilution, full exterior wetting and materials compatible with the selected liquid.

Manual mixing gives inconsistent treatment concentration.A metering pump doses solution into a defined water volume in the covered tank.

Suit folds and rear surfaces receive insufficient contact.Multi-side spray zones operate for the selected dwell time with rotation guidance.

A chosen chemical damages ordinary elastomers or pump materials.Wetted components are selected for the actual treatment chemistry.

Used solution cannot enter a standard sanitary drain.A dedicated trapped outlet can connect to the facility’s controlled effluent route.

Aplicações típicas

High-containment research exitsHazardous chemical laboratoriesPositive-pressure suit roomsBiological process support areas

Parâmetros técnicos

Typical corrosion-resistant construction ranges for a chemical suit shower are provided below.

Material principal	PIR-insulated SUS 316L enclosure with chemical-compatible spray circuit, mix tank and dosing pump
Painel de espessura	75-100 mm chemical-resistant insulated panels
Largura efetiva	1000-1400 mm clear treatment-zone width
Comprimento máximo	Up to 2500 mm complete chamber length
Aço enfrentando espessura	1.2-2.0 mm SUS 316L wetted facing
Densidade Core	40-45 kg/m³ closed-cell PIR insulation
Condutividade térmica	0.021-0.026 W/(m·K) for the insulated shell
Superfície acabado	Passivated SUS 316L with smooth welded corners and chemistry-compatible seals
Tipo conjunto	Continuously sealed enclosure joints with sanitary piping and isolated treatment and rinse manifolds
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Single-pass or recirculating processSolution concentration monitoringHeated treatment tankEffluent collection skid

Planning a Chemical Protective-Suit Decontamination Shower specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe