Chemical protective-suit decontamination shower with stainless chamber and dosing skid

人員 · 材料の汚染除去設備

化学の保護スーツの除染シャワー

A protective-suit treatment chamber that doses a compatible solution into a controlled spray cycle followed by a separate rinse.

Metered Solution Dosing
Controlled Contact Time
Separate Rinse Circuit
Chemical-Resistant Wetted Parts

見積もりリクエスト製品案内

商品紹介

This decontamination shower combines a covered mixing vessel, dosing pump and circulation manifold for repeatable treatment of the exterior of compatible protective suits. The design separates the treatment circuit from the final water rinse and directs used liquid to a designated drain route. Material selection for seals, pump components and pipework is matched to the selected process chemistry.

主要な特徴

A covered tank and dosing pump reduce open handling of treatment liquid.

Recirculation maintains nozzle pressure during the chosen contact period.

Separate treatment and rinse branches reduce unintended chemical carryover.

Instrument ports allow solution level, temperature or concentration monitoring.

Surrounding spray zones reach the front, back, hood and boot surfaces.

お客様の製品に関する懸念事項

Chemical suit treatment depends on accurate dilution, full exterior wetting and materials compatible with the selected liquid.

Manual mixing gives inconsistent treatment concentration.A metering pump doses solution into a defined water volume in the covered tank.

Suit folds and rear surfaces receive insufficient contact.Multi-side spray zones operate for the selected dwell time with rotation guidance.

A chosen chemical damages ordinary elastomers or pump materials.Wetted components are selected for the actual treatment chemistry.

Used solution cannot enter a standard sanitary drain.A dedicated trapped outlet can connect to the facility’s controlled effluent route.

典型的な用途

High-containment research exitsHazardous chemical laboratoriesPositive-pressure suit roomsBiological process support areas

技術的なパラメータ

Typical corrosion-resistant construction ranges for a chemical suit shower are provided below.

コア材料	PIR-insulated SUS 316L enclosure with chemical-compatible spray circuit, mix tank and dosing pump
パネルの厚さ	75-100 mm chemical-resistant insulated panels
有効幅	1000-1400 mm clear treatment-zone width
最大長さ	Up to 2500 mm complete chamber length
鋼鉄の厚さを直面する	1.2-2.0 mm SUS 316L wetted facing
コア密度	40-45 kg/m³ closed-cell PIR insulation
熱伝導率	0.021-0.026 W/(m·K) for the insulated shell
表面仕上げ	Passivated SUS 316L with smooth welded corners and chemistry-compatible seals
ジョイントタイプ	Continuously sealed enclosure joints with sanitary piping and isolated treatment and rinse manifolds
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single-pass or recirculating processSolution concentration monitoringHeated treatment tankEffluent collection skid

Planning a Chemical Protective-Suit Decontamination Shower specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する