English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات إزالة التلوث للموظفين والمواد
حمام إزالة التلوث واقية كيميائية
A protective-suit treatment chamber that doses a compatible solution into a controlled spray cycle followed by a separate rinse.
- Metered Solution Dosing
- Controlled Contact Time
- Separate Rinse Circuit
- Chemical-Resistant Wetted Parts
مقدمة المنتج
This decontamination shower combines a covered mixing vessel, dosing pump and circulation manifold for repeatable treatment of the exterior of compatible protective suits. The design separates the treatment circuit from the final water rinse and directs used liquid to a designated drain route. Material selection for seals, pump components and pipework is matched to the selected process chemistry.
الخصائص الرئيسية
Recirculation maintains nozzle pressure during the chosen contact period.
Separate treatment and rinse branches reduce unintended chemical carryover.
Instrument ports allow solution level, temperature or concentration monitoring.
Surrounding spray zones reach the front, back, hood and boot surfaces.
مخاوف المنتج للعملاء
Chemical suit treatment depends on accurate dilution, full exterior wetting and materials compatible with the selected liquid.
Manual mixing gives inconsistent treatment concentration.A metering pump doses solution into a defined water volume in the covered tank.
Suit folds and rear surfaces receive insufficient contact.Multi-side spray zones operate for the selected dwell time with rotation guidance.
A chosen chemical damages ordinary elastomers or pump materials.Wetted components are selected for the actual treatment chemistry.
Used solution cannot enter a standard sanitary drain.A dedicated trapped outlet can connect to the facility’s controlled effluent route.
تطبيقات نموذجية
High-containment research exitsHazardous chemical laboratoriesPositive-pressure suit roomsBiological process support areas
المعلمات الفنية
Typical corrosion-resistant construction ranges for a chemical suit shower are provided below.
| المواد الأساسية | PIR-insulated SUS 316L enclosure with chemical-compatible spray circuit, mix tank and dosing pump |
|---|---|
| سمك اللوحة | 75-100 mm chemical-resistant insulated panels |
| العرض الفعال | 1000-1400 mm clear treatment-zone width |
| الحد الأقصى الطول | Up to 2500 mm complete chamber length |
| الصلب يواجه سمك | 1.2-2.0 mm SUS 316L wetted facing |
| الكثافة الأساسية | 40-45 kg/m³ closed-cell PIR insulation |
| الموصلية الحرارية | 0.021-0.026 W/(m·K) for the insulated shell |
| إنهاء السطح | Passivated SUS 316L with smooth welded corners and chemistry-compatible seals |
| نوع المشترك | Continuously sealed enclosure joints with sanitary piping and isolated treatment and rinse manifolds |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Single-pass or recirculating processSolution concentration monitoringHeated treatment tankEffluent collection skid
Planning a Chemical Protective-Suit Decontamination Shower specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
