Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de descontaminación de personal y material
Ducha de descontaminación de protección química
A protective-suit treatment chamber that doses a compatible solution into a controlled spray cycle followed by a separate rinse.
- Metered Solution Dosing
- Controlled Contact Time
- Separate Rinse Circuit
- Chemical-Resistant Wetted Parts
Introducción del producto
This decontamination shower combines a covered mixing vessel, dosing pump and circulation manifold for repeatable treatment of the exterior of compatible protective suits. The design separates the treatment circuit from the final water rinse and directs used liquid to a designated drain route. Material selection for seals, pump components and pipework is matched to the selected process chemistry.
Características clave
Recirculation maintains nozzle pressure during the chosen contact period.
Separate treatment and rinse branches reduce unintended chemical carryover.
Instrument ports allow solution level, temperature or concentration monitoring.
Surrounding spray zones reach the front, back, hood and boot surfaces.
Preocupaciones del producto del cliente
Chemical suit treatment depends on accurate dilution, full exterior wetting and materials compatible with the selected liquid.
Manual mixing gives inconsistent treatment concentration.A metering pump doses solution into a defined water volume in the covered tank.
Suit folds and rear surfaces receive insufficient contact.Multi-side spray zones operate for the selected dwell time with rotation guidance.
A chosen chemical damages ordinary elastomers or pump materials.Wetted components are selected for the actual treatment chemistry.
Used solution cannot enter a standard sanitary drain.A dedicated trapped outlet can connect to the facility’s controlled effluent route.
Aplicaciones típicas
High-containment research exitsHazardous chemical laboratoriesPositive-pressure suit roomsBiological process support areas
Parámetros técnicos
Typical corrosion-resistant construction ranges for a chemical suit shower are provided below.
| Materiales Core | PIR-insulated SUS 316L enclosure with chemical-compatible spray circuit, mix tank and dosing pump |
|---|---|
| Panel de espesor | 75-100 mm chemical-resistant insulated panels |
| Ancho efectivo | 1000-1400 mm clear treatment-zone width |
| Longitud máxima | Up to 2500 mm complete chamber length |
| Acero frente a espesor | 1.2-2.0 mm SUS 316L wetted facing |
| Densidad Core | 40-45 kg/m³ closed-cell PIR insulation |
| Conductividad térmica | 0.021-0.026 W/(m·K) for the insulated shell |
| Superficie acabada | Passivated SUS 316L with smooth welded corners and chemistry-compatible seals |
| Tipo conjunto | Continuously sealed enclosure joints with sanitary piping and isolated treatment and rinse manifolds |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Single-pass or recirculating processSolution concentration monitoringHeated treatment tankEffluent collection skid
Planning a Chemical Protective-Suit Decontamination Shower specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
