İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Personel ve Malzeme Dekontaminasyon Ekipmanları
Kimyasal Koruyucu-Kıyafet Dekontaminasyon Duş
A protective-suit treatment chamber that doses a compatible solution into a controlled spray cycle followed by a separate rinse.
- Metered Solution Dosing
- Controlled Contact Time
- Separate Rinse Circuit
- Chemical-Resistant Wetted Parts
Ürün tanıtımı
This decontamination shower combines a covered mixing vessel, dosing pump and circulation manifold for repeatable treatment of the exterior of compatible protective suits. The design separates the treatment circuit from the final water rinse and directs used liquid to a designated drain route. Material selection for seals, pump components and pipework is matched to the selected process chemistry.
Ana Özellikler
Recirculation maintains nozzle pressure during the chosen contact period.
Separate treatment and rinse branches reduce unintended chemical carryover.
Instrument ports allow solution level, temperature or concentration monitoring.
Surrounding spray zones reach the front, back, hood and boot surfaces.
Müşteri Ürün Sorunları
Chemical suit treatment depends on accurate dilution, full exterior wetting and materials compatible with the selected liquid.
Manual mixing gives inconsistent treatment concentration.A metering pump doses solution into a defined water volume in the covered tank.
Suit folds and rear surfaces receive insufficient contact.Multi-side spray zones operate for the selected dwell time with rotation guidance.
A chosen chemical damages ordinary elastomers or pump materials.Wetted components are selected for the actual treatment chemistry.
Used solution cannot enter a standard sanitary drain.A dedicated trapped outlet can connect to the facility’s controlled effluent route.
Tipik uygulamalar
High-containment research exitsHazardous chemical laboratoriesPositive-pressure suit roomsBiological process support areas
Teknik parametreler
Typical corrosion-resistant construction ranges for a chemical suit shower are provided below.
| Temel malzemeler | PIR-insulated SUS 316L enclosure with chemical-compatible spray circuit, mix tank and dosing pump |
|---|---|
| Panel kalınlığı | 75-100 mm chemical-resistant insulated panels |
| Effective Width (Etkili Genişlik) | 1000-1400 mm clear treatment-zone width |
| Maksimum uzunluk | Up to 2500 mm complete chamber length |
| Çelik yüz yüze kalınlığı | 1.2-2.0 mm SUS 316L wetted facing |
| Core Density (Çekirdek Yoğunluğu) | 40-45 kg/m³ closed-cell PIR insulation |
| Termal İletkenlik | 0.021-0.026 W/(m·K) for the insulated shell |
| Yüzey bitirme | Passivated SUS 316L with smooth welded corners and chemistry-compatible seals |
| Ortak tip | Continuously sealed enclosure joints with sanitary piping and isolated treatment and rinse manifolds |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Single-pass or recirculating processSolution concentration monitoringHeated treatment tankEffluent collection skid
Planning a Chemical Protective-Suit Decontamination Shower specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
