Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Equipement de décontamination du personnel et du matériel
Douche de décontamination de protection chimique
A protective-suit treatment chamber that doses a compatible solution into a controlled spray cycle followed by a separate rinse.
- Metered Solution Dosing
- Controlled Contact Time
- Separate Rinse Circuit
- Chemical-Resistant Wetted Parts
Introduction de produit
This decontamination shower combines a covered mixing vessel, dosing pump and circulation manifold for repeatable treatment of the exterior of compatible protective suits. The design separates the treatment circuit from the final water rinse and directs used liquid to a designated drain route. Material selection for seals, pump components and pipework is matched to the selected process chemistry.
Key Features
Recirculation maintains nozzle pressure during the chosen contact period.
Separate treatment and rinse branches reduce unintended chemical carryover.
Instrument ports allow solution level, temperature or concentration monitoring.
Surrounding spray zones reach the front, back, hood and boot surfaces.
Préoccupations du client produit
Chemical suit treatment depends on accurate dilution, full exterior wetting and materials compatible with the selected liquid.
Manual mixing gives inconsistent treatment concentration.A metering pump doses solution into a defined water volume in the covered tank.
Suit folds and rear surfaces receive insufficient contact.Multi-side spray zones operate for the selected dwell time with rotation guidance.
A chosen chemical damages ordinary elastomers or pump materials.Wetted components are selected for the actual treatment chemistry.
Used solution cannot enter a standard sanitary drain.A dedicated trapped outlet can connect to the facility’s controlled effluent route.
Les applications typiques
High-containment research exitsHazardous chemical laboratoriesPositive-pressure suit roomsBiological process support areas
Paramètres techniques
Typical corrosion-resistant construction ranges for a chemical suit shower are provided below.
| Matériaux de base | PIR-insulated SUS 316L enclosure with chemical-compatible spray circuit, mix tank and dosing pump |
|---|---|
| Panneau épaisseur | 75-100 mm chemical-resistant insulated panels |
| Largeur effective | 1000-1400 mm clear treatment-zone width |
| Longueur maximale | Up to 2500 mm complete chamber length |
| Acier face épaisseur | 1.2-2.0 mm SUS 316L wetted facing |
| Densité Core | 40-45 kg/m³ closed-cell PIR insulation |
| Conductivité thermique | 0.021-0.026 W/(m·K) for the insulated shell |
| surface finie | Passivated SUS 316L with smooth welded corners and chemistry-compatible seals |
| Type joint | Continuously sealed enclosure joints with sanitary piping and isolated treatment and rinse manifolds |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Single-pass or recirculating processSolution concentration monitoringHeated treatment tankEffluent collection skid
Planning a Chemical Protective-Suit Decontamination Shower specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
