Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Personal und Material Dekontamination Ausrüstung
Chemische Schutzanzüge Decontamination Dusche
A protective-suit treatment chamber that doses a compatible solution into a controlled spray cycle followed by a separate rinse.
- Metered Solution Dosing
- Controlled Contact Time
- Separate Rinse Circuit
- Chemical-Resistant Wetted Parts
Produkteinführung
This decontamination shower combines a covered mixing vessel, dosing pump and circulation manifold for repeatable treatment of the exterior of compatible protective suits. The design separates the treatment circuit from the final water rinse and directs used liquid to a designated drain route. Material selection for seals, pump components and pipework is matched to the selected process chemistry.
Key Features
Recirculation maintains nozzle pressure during the chosen contact period.
Separate treatment and rinse branches reduce unintended chemical carryover.
Instrument ports allow solution level, temperature or concentration monitoring.
Surrounding spray zones reach the front, back, hood and boot surfaces.
Kunden Produktbedenken
Chemical suit treatment depends on accurate dilution, full exterior wetting and materials compatible with the selected liquid.
Manual mixing gives inconsistent treatment concentration.A metering pump doses solution into a defined water volume in the covered tank.
Suit folds and rear surfaces receive insufficient contact.Multi-side spray zones operate for the selected dwell time with rotation guidance.
A chosen chemical damages ordinary elastomers or pump materials.Wetted components are selected for the actual treatment chemistry.
Used solution cannot enter a standard sanitary drain.A dedicated trapped outlet can connect to the facility’s controlled effluent route.
Typische Anwendungen
High-containment research exitsHazardous chemical laboratoriesPositive-pressure suit roomsBiological process support areas
Technische Parameter
Typical corrosion-resistant construction ranges for a chemical suit shower are provided below.
| Core Material | PIR-insulated SUS 316L enclosure with chemical-compatible spray circuit, mix tank and dosing pump |
|---|---|
| Panel Dicke | 75-100 mm chemical-resistant insulated panels |
| Effektive Breite | 1000-1400 mm clear treatment-zone width |
| Maximale Länge | Up to 2500 mm complete chamber length |
| Stahl facing Dicke | 1.2-2.0 mm SUS 316L wetted facing |
| Kerndichte | 40-45 kg/m³ closed-cell PIR insulation |
| Thermische Leitfähigkeit | 0.021-0.026 W/(m·K) for the insulated shell |
| Oberfläche Finish | Passivated SUS 316L with smooth welded corners and chemistry-compatible seals |
| Gemeinsamer Typ | Continuously sealed enclosure joints with sanitary piping and isolated treatment and rinse manifolds |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Single-pass or recirculating processSolution concentration monitoringHeated treatment tankEffluent collection skid
Planning a Chemical Protective-Suit Decontamination Shower specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
