Chemical protective-suit decontamination shower with stainless chamber and dosing skid

인력 및 재료 오염 제거 장비

화학적 보호 - 세트 오염 제거 샤워

A protective-suit treatment chamber that doses a compatible solution into a controlled spray cycle followed by a separate rinse.

Metered Solution Dosing
Controlled Contact Time
Separate Rinse Circuit
Chemical-Resistant Wetted Parts

견적 요청 제품 찾아보기

상품 소개

This decontamination shower combines a covered mixing vessel, dosing pump and circulation manifold for repeatable treatment of the exterior of compatible protective suits. The design separates the treatment circuit from the final water rinse and directs used liquid to a designated drain route. Material selection for seals, pump components and pipework is matched to the selected process chemistry.

주요 기능

A covered tank and dosing pump reduce open handling of treatment liquid.

Recirculation maintains nozzle pressure during the chosen contact period.

Separate treatment and rinse branches reduce unintended chemical carryover.

Instrument ports allow solution level, temperature or concentration monitoring.

Surrounding spray zones reach the front, back, hood and boot surfaces.

고객 제품 관심사

Chemical suit treatment depends on accurate dilution, full exterior wetting and materials compatible with the selected liquid.

Manual mixing gives inconsistent treatment concentration.A metering pump doses solution into a defined water volume in the covered tank.

Suit folds and rear surfaces receive insufficient contact.Multi-side spray zones operate for the selected dwell time with rotation guidance.

A chosen chemical damages ordinary elastomers or pump materials.Wetted components are selected for the actual treatment chemistry.

Used solution cannot enter a standard sanitary drain.A dedicated trapped outlet can connect to the facility’s controlled effluent route.

일반적인 응용 프로그램

High-containment research exitsHazardous chemical laboratoriesPositive-pressure suit roomsBiological process support areas

기술 매개변수

Typical corrosion-resistant construction ranges for a chemical suit shower are provided below.

핵심 재료	PIR-insulated SUS 316L enclosure with chemical-compatible spray circuit, mix tank and dosing pump
패널 두께	75-100 mm chemical-resistant insulated panels
유효 폭	1000-1400 mm clear treatment-zone width
최대 길이	Up to 2500 mm complete chamber length
강철 면면 두께	1.2-2.0 mm SUS 316L wetted facing
코어 밀도	40-45 kg/m³ closed-cell PIR insulation
열전도도 (Thermal Conductivity)	0.021-0.026 W/(m·K) for the insulated shell
표면 마무리	Passivated SUS 316L with smooth welded corners and chemistry-compatible seals
접합 유형	Continuously sealed enclosure joints with sanitary piping and isolated treatment and rinse manifolds
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single-pass or recirculating processSolution concentration monitoringHeated treatment tankEffluent collection skid

Planning a Chemical Protective-Suit Decontamination Shower specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.