Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Acessórios de instalação de sala limpa
Z Conector de grade de teto
A galvanized four-way stamped plate that locates and fastens intersecting cleanroom ceiling-grid channels at a common center.
- Four-Way Geometry
- Eight Adjustment Slots
- Folded Locating Tabs
- Galvanized Steel
Introdução do produto
The ceiling grid connector is a one-piece stamped steel cross plate with four perpendicular arms. Paired oblong slots on every arm provide fixing and limited alignment adjustment, while folded tabs register mating channels around the central intersection. The low-profile fitting reinforces a four-way ceiling-grid joint without adding a bulky exposed component below the finished ceiling plane.
Características-chave
Two slots per arm provide balanced fixing and field adjustment.
Folded locating tabs guide compatible channels into repeatable positions.
Stamped galvanized construction combines low profile with practical joint stiffness.
Preocupações do produto do cliente
Four intersecting ceiling channels must remain square and flush while installers position and tighten multiple fasteners.
Loose channels drift out of square during assembly.The cross geometry and locating tabs register all four directions from one center.
Fixed round holes offer little tolerance for site alignment.Paired elongated slots provide controlled adjustment before tightening.
Stacked splice pieces create an uneven joint thickness.A single stamped plate distributes the connection in one low-profile layer.
Unprotected concealed steel can corrode in humid plenums.Galvanized or stainless material is selected for the expected exposure.
Aplicações típicas
Cleanroom ceiling-grid intersectionsModular ceiling framesService-plenum support gridsWalkable ceiling subframesFour-way channel junctions
Parâmetros técnicos
Typical construction ranges for a four-way galvanized cleanroom ceiling-grid connector are listed below.
| Material principal | One-piece stamped galvanized carbon-steel cross connector |
|---|---|
| Painel de espessura | 40-150 mm compatible ceiling-panel thickness |
| Largura efetiva | 30-100 mm compatible grid-channel width per arm |
| Comprimento máximo | Up to 500 mm overall connector span |
| Aço enfrentando espessura | 1.50-3.00 mm stamped connector thickness |
| Densidade Core | Approximately 7850 kg/m³ for carbon steel |
| Condutividade térmica | 45 - 60 W / (m · K) para aço carbono |
| Superfície acabado | Silver zinc-plated or hot-dip galvanized stamped steel |
| Tipo conjunto | Four-way slotted overlap connection with folded channel-locating tabs |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Galvanized or stainless steelCustom arm lengthRound or elongated fixing holesChannel-specific locating-tab geometry
Planning a Ceiling Grid Connector specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
