Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Accesorios de instalación de sala limpia
Conector de malla de techo
A galvanized four-way stamped plate that locates and fastens intersecting cleanroom ceiling-grid channels at a common center.
- Four-Way Geometry
- Eight Adjustment Slots
- Folded Locating Tabs
- Galvanized Steel
Introducción del producto
The ceiling grid connector is a one-piece stamped steel cross plate with four perpendicular arms. Paired oblong slots on every arm provide fixing and limited alignment adjustment, while folded tabs register mating channels around the central intersection. The low-profile fitting reinforces a four-way ceiling-grid joint without adding a bulky exposed component below the finished ceiling plane.
Características clave
Two slots per arm provide balanced fixing and field adjustment.
Folded locating tabs guide compatible channels into repeatable positions.
Stamped galvanized construction combines low profile with practical joint stiffness.
Preocupaciones del producto del cliente
Four intersecting ceiling channels must remain square and flush while installers position and tighten multiple fasteners.
Loose channels drift out of square during assembly.The cross geometry and locating tabs register all four directions from one center.
Fixed round holes offer little tolerance for site alignment.Paired elongated slots provide controlled adjustment before tightening.
Stacked splice pieces create an uneven joint thickness.A single stamped plate distributes the connection in one low-profile layer.
Unprotected concealed steel can corrode in humid plenums.Galvanized or stainless material is selected for the expected exposure.
Aplicaciones típicas
Cleanroom ceiling-grid intersectionsModular ceiling framesService-plenum support gridsWalkable ceiling subframesFour-way channel junctions
Parámetros técnicos
Typical construction ranges for a four-way galvanized cleanroom ceiling-grid connector are listed below.
| Materiales Core | One-piece stamped galvanized carbon-steel cross connector |
|---|---|
| Panel de espesor | 40-150 mm compatible ceiling-panel thickness |
| Ancho efectivo | 30-100 mm compatible grid-channel width per arm |
| Longitud máxima | Up to 500 mm overall connector span |
| Acero frente a espesor | 1.50-3.00 mm stamped connector thickness |
| Densidad Core | Approximately 7850 kg/m³ for carbon steel |
| Conductividad térmica | Approximately 45-60 W/(m·K) for carbon steel |
| Superficie acabada | Silver zinc-plated or hot-dip galvanized stamped steel |
| Tipo conjunto | Four-way slotted overlap connection with folded channel-locating tabs |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Galvanized or stainless steelCustom arm lengthRound or elongated fixing holesChannel-specific locating-tab geometry
Planning a Ceiling Grid Connector specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
