Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Installation Zubehör
Ceiling Grid Connector
A galvanized four-way stamped plate that locates and fastens intersecting cleanroom ceiling-grid channels at a common center.
- Four-Way Geometry
- Eight Adjustment Slots
- Folded Locating Tabs
- Galvanized Steel
Produkteinführung
The ceiling grid connector is a one-piece stamped steel cross plate with four perpendicular arms. Paired oblong slots on every arm provide fixing and limited alignment adjustment, while folded tabs register mating channels around the central intersection. The low-profile fitting reinforces a four-way ceiling-grid joint without adding a bulky exposed component below the finished ceiling plane.
Key Features
Two slots per arm provide balanced fixing and field adjustment.
Folded locating tabs guide compatible channels into repeatable positions.
Stamped galvanized construction combines low profile with practical joint stiffness.
Kunden Produktbedenken
Four intersecting ceiling channels must remain square and flush while installers position and tighten multiple fasteners.
Loose channels drift out of square during assembly.The cross geometry and locating tabs register all four directions from one center.
Fixed round holes offer little tolerance for site alignment.Paired elongated slots provide controlled adjustment before tightening.
Stacked splice pieces create an uneven joint thickness.A single stamped plate distributes the connection in one low-profile layer.
Unprotected concealed steel can corrode in humid plenums.Galvanized or stainless material is selected for the expected exposure.
Typische Anwendungen
Cleanroom ceiling-grid intersectionsModular ceiling framesService-plenum support gridsWalkable ceiling subframesFour-way channel junctions
Technische Parameter
Typical construction ranges for a four-way galvanized cleanroom ceiling-grid connector are listed below.
| Core Material | One-piece stamped galvanized carbon-steel cross connector |
|---|---|
| Panel Dicke | 40-150 mm compatible ceiling-panel thickness |
| Effektive Breite | 30-100 mm compatible grid-channel width per arm |
| Maximale Länge | Up to 500 mm overall connector span |
| Stahl facing Dicke | 1.50-3.00 mm stamped connector thickness |
| Kerndichte | Approximately 7850 kg/m³ for carbon steel |
| Thermische Leitfähigkeit | Approximately 45-60 W/(m·K) for carbon steel |
| Oberfläche Finish | Silver zinc-plated or hot-dip galvanized stamped steel |
| Gemeinsamer Typ | Four-way slotted overlap connection with folded channel-locating tabs |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Galvaniert oder EdelstahlCustom arm lengthRound or elongated fixing holesChannel-specific locating-tab geometry
Planning a Ceiling Grid Connector specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
