English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Аксессуары для установки в чистых помещениях
Соединитель потолочной сетки
A galvanized four-way stamped plate that locates and fastens intersecting cleanroom ceiling-grid channels at a common center.
- Four-Way Geometry
- Eight Adjustment Slots
- Folded Locating Tabs
- Galvanized Steel
Введение продукции
The ceiling grid connector is a one-piece stamped steel cross plate with four perpendicular arms. Paired oblong slots on every arm provide fixing and limited alignment adjustment, while folded tabs register mating channels around the central intersection. The low-profile fitting reinforces a four-way ceiling-grid joint without adding a bulky exposed component below the finished ceiling plane.
Основные характеристики
Two slots per arm provide balanced fixing and field adjustment.
Folded locating tabs guide compatible channels into repeatable positions.
Stamped galvanized construction combines low profile with practical joint stiffness.
Обеспокоенность клиентов продуктами
Four intersecting ceiling channels must remain square and flush while installers position and tighten multiple fasteners.
Loose channels drift out of square during assembly.The cross geometry and locating tabs register all four directions from one center.
Fixed round holes offer little tolerance for site alignment.Paired elongated slots provide controlled adjustment before tightening.
Stacked splice pieces create an uneven joint thickness.A single stamped plate distributes the connection in one low-profile layer.
Unprotected concealed steel can corrode in humid plenums.Galvanized or stainless material is selected for the expected exposure.
Типичные приложения
Cleanroom ceiling-grid intersectionsModular ceiling framesService-plenum support gridsWalkable ceiling subframesFour-way channel junctions
Технические параметры
Typical construction ranges for a four-way galvanized cleanroom ceiling-grid connector are listed below.
| Основной материал | One-piece stamped galvanized carbon-steel cross connector |
|---|---|
| Толщина панели | 40-150 mm compatible ceiling-panel thickness |
| эффективная ширина | 30-100 mm compatible grid-channel width per arm |
| Максимальная длина | Up to 500 mm overall connector span |
| Толщина линий стали | 1.50-3.00 mm stamped connector thickness |
| Плотность ядра | Approximately 7850 kg/m³ for carbon steel |
| Теплопроводимость | Approximately 45-60 W/(m·K) for carbon steel |
| Поверхностная отделка | Silver zinc-plated or hot-dip galvanized stamped steel |
| Объединенный тип | Four-way slotted overlap connection with folded channel-locating tabs |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Galvanized or stainless steelCustom arm lengthRound or elongated fixing holesChannel-specific locating-tab geometry
Planning a Ceiling Grid Connector specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
