Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Accessoires d'installation Cleanroom
Connecteur Grid Plafond
A galvanized four-way stamped plate that locates and fastens intersecting cleanroom ceiling-grid channels at a common center.
- Four-Way Geometry
- Eight Adjustment Slots
- Folded Locating Tabs
- Galvanized Steel
Introduction de produit
The ceiling grid connector is a one-piece stamped steel cross plate with four perpendicular arms. Paired oblong slots on every arm provide fixing and limited alignment adjustment, while folded tabs register mating channels around the central intersection. The low-profile fitting reinforces a four-way ceiling-grid joint without adding a bulky exposed component below the finished ceiling plane.
Key Features
Two slots per arm provide balanced fixing and field adjustment.
Folded locating tabs guide compatible channels into repeatable positions.
Stamped galvanized construction combines low profile with practical joint stiffness.
Préoccupations du client produit
Four intersecting ceiling channels must remain square and flush while installers position and tighten multiple fasteners.
Loose channels drift out of square during assembly.The cross geometry and locating tabs register all four directions from one center.
Fixed round holes offer little tolerance for site alignment.Paired elongated slots provide controlled adjustment before tightening.
Stacked splice pieces create an uneven joint thickness.A single stamped plate distributes the connection in one low-profile layer.
Unprotected concealed steel can corrode in humid plenums.Galvanized or stainless material is selected for the expected exposure.
Les applications typiques
Cleanroom ceiling-grid intersectionsModular ceiling framesService-plenum support gridsWalkable ceiling subframesFour-way channel junctions
Paramètres techniques
Typical construction ranges for a four-way galvanized cleanroom ceiling-grid connector are listed below.
| Matériaux de base | One-piece stamped galvanized carbon-steel cross connector |
|---|---|
| Panneau épaisseur | 40-150 mm compatible ceiling-panel thickness |
| Largeur effective | 30-100 mm compatible grid-channel width per arm |
| Longueur maximale | Up to 500 mm overall connector span |
| Acier face épaisseur | 1.50-3.00 mm stamped connector thickness |
| Densité Core | Approximately 7850 kg/m³ for carbon steel |
| Conductivité thermique | Approximately 45-60 W/(m·K) for carbon steel |
| surface finie | Silver zinc-plated or hot-dip galvanized stamped steel |
| Type joint | Four-way slotted overlap connection with folded channel-locating tabs |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Galvanized or stainless steelCustom arm lengthRound or elongated fixing holesChannel-specific locating-tab geometry
Planning a Ceiling Grid Connector specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
